PHILIPS 50PFP5332D/37 Sound No Picture

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikeysride9812
    New Member
    • Feb 2012
    • 4
    #1

    PHILIPS 50PFP5332D/37 Sound No Picture

    I have a PHILIPS 50PFP5332D/37 that will play sound no picture I pulled it a part seen a couple bad caps I found a couple that look bulged and tested bad with my esr meter so I replaced them still same thing comes on you can hear click then you here another click the led on the power board will blink once then pause blink again then repeat. I tested the vs leads got 215 VDC then tested the vs got 61VDC unhooked the vs connector stays powered up plug it in goes through the cycle of the blinks


    Any ideas if so thank yo


    Gordon
    Tags: None
    • mikeysride9812
      New Member
      • Feb 2012
      • 4
      #2
      Re: PHILIPS 50PFP5332D/37 Sound No Picture

      No ideas ???? I would like to get this tv fixed pls

        Comment

        • tom66
          EVs Rule
          • Apr 2011
          • 32560
          • UK
          #3
          Re: PHILIPS 50PFP5332D/37 Sound No Picture

          Do you hear any buzzing from either sustain board?
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

            Comment

            • mikeysride9812
              New Member
              • Feb 2012
              • 4
              #4
              Re: PHILIPS 50PFP5332D/37 Sound No Picture

              no buzzing

                Comment

                • mikeysride9812
                  New Member
                  • Feb 2012
                  • 4
                  #5
                  Re: PHILIPS 50PFP5332D/37 Sound No Picture

                  here is the csm.txt


                  1.3. Set type : 50PFP5332D/37
                  1.4. Production code : YA1A0710003404
                  1.5. Code 1 : 04 46 00 00 00
                  1.6. Code 2 : 00 00 00 00 00
                  1.7. Options 1 : 02064 00292 00549 02691
                  1.8. Options 2 : 01109 00000 21024 00000
                  1.13. 12NC SSB : 32805531032108
                  1.14. Installed date : 01/01/1996
                  2.2. Pixel Plus : On
                  2.4. DNR : Medium
                  2.5. Noise figure : 0
                  3.1. Headphone volume : 30
                  3.2. Dolby : Off
                  3.3. Surround mode : Virtual Dolby Surround
                  3.4. Centre input : Off
                  3.5. Audio system : Mono
                  3.6. AVL : On
                  3.7. Delta volume : 0
                  4.1. Preset lock : Unlocked
                  4.3. Lock after : Off
                  4.6. TV ratings lock : None
                  4.7. Movie ratings lock : None
                  4.8. V-Chip TV status : None
                  4.9. V-Chip movie status : None
                  4.10. Region rating status (RRT) : Off
                  4.12. Table channel changed : No
                  5.1. On timer : Off
                  5.2. Location : Home
                  6.1. HDMI key validity : Valid
                  6.2. IEEE key validity : Invalid
                  6.3. POD key validity : Invalid
                  7.2. TV system : M
                  7.3. Source : Tuner,Video
                  7.4. Tuned bit : No
                  7.6. Digital signal modulation :
                  8.1. 12NC one zip SW : 3139 127 09726
                  8.2. Initial main SW : EJ30U_0.77.1.0
                  8.3. Current main SW : EJ30U_0.81.8.1
                  8.5. Flash utils SW : EJ30U_0.77.1.0
                  8.6. Standby SW : STDBY_3.0.1.37
                  8.7. MOP SW :
                  8.8. Pacific 3 Flash SW :
                  8.11. NVM version : EJ30U_0.0.0.5

                    Comment

                    • tedw
                      New Member
                      • Dec 2012
                      • 2
                      • UNITED STATES OF AMERICA
                      #6
                      Re: PHILIPS 50PFP5332D/37 Sound No Picture

                      I have a question, not sure if this is the right place cuz I am a newbie.

                      I have this TV in this post above. 50pfp5332d/37 and I accedientially ripped the hdmi connetors off the back of the SSB board. Now i went to look for a new board for the original number 3104 313 61731 and replaced it with a 3104 313 61734 board figuring it was simply a newer model board?

                      I reprogrammed the SSB to my options code and screen diversity but still I have NO HDMI input and or when I plug my pc into the HDMI it is not recognized? I plug the pc into the other TV and it is recognized.

                      Do I have a BAD BOARD or do I have the Wrong BOARD. This new board sure does seem like everything works but the HDMI Inputs. Is there something else I should try?

                      Option Code
                      02064 00292
                      00549 02691
                      01109 00000
                      21152 00000

                      Screen diversity 085

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • TR103
                          Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
                          by TR103
                          Hi, I have a Samsung UE50TU with:
                          - sound and backlight, but no picture
                          - when it arrived, it had a picture for a few seconds
                          - it keeps rebooting
                          - without ribbon cable between the two panel boards, it does not reboot but I have no picture
                          - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
                          - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

                          - without cable between mainboard and lcd panel and with a jumpered...
                          01-22-2025, 04:12 PM
                        • Mgiffune
                          Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                          by Mgiffune
                          I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                          I ordered a supposedly ‘new' Tcon board this time, and                          ...
                          06-09-2024, 10:28 AM
                        • Ierwin
                          Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
                          by Ierwin
                          Hello everyone,
                          Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
                          The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
                          He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
                          I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
                          Anyway I still fully expect that there has been something seriously damaged...
                          05-13-2025, 03:31 PM
                        • jchang
                          Samsung UN70NU6900F no picture and no sound
                          by jchang
                          Hi all

                          I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



                          Symptom:
                          No picture no sound.
                          When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
                          No sound at all.



                          What I tried:
                          1. I tried unplugging the left or right ribbon...
                          01-09-2023, 06:28 PM
                        • aidanmo
                          Philips 43PUS7506/12 - Loud blown out sound
                          by aidanmo
                          Hello,

                          I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
                          I thought maybe the speakers got damaged, so I replaced them - no dice.
                          • Using the internal speakers, it always happens.
                          • Using the headphone jack, it never happens.
                          • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
                          ...
                          02-28-2025, 03:13 PM
                        • Loading...
                        • No more items.
                        Working...