Hello everyone,
This has been giving me many problems and I'm hoping someone can shed light on the subject. The TV is a 2003 model year Plasma, when it is powered up the screen displays a green snow like effect with 1mm lines on both the left and right edge. After tearing it down I noticed a small ceramic resistor on the Y-Sustain board was Burned up. I replaced the Y-Sustain board and after powering up, burned the same resistor
Could this have something to do with my power supply?? Maybe linked to the X-sustain or ABUS boards? I should also note that there are no other visual signs of damage on the boards, no blown capacitors/resistors/burned circuitry etc... Please help!
Wes
This has been giving me many problems and I'm hoping someone can shed light on the subject. The TV is a 2003 model year Plasma, when it is powered up the screen displays a green snow like effect with 1mm lines on both the left and right edge. After tearing it down I noticed a small ceramic resistor on the Y-Sustain board was Burned up. I replaced the Y-Sustain board and after powering up, burned the same resistor
Could this have something to do with my power supply?? Maybe linked to the X-sustain or ABUS boards? I should also note that there are no other visual signs of damage on the boards, no blown capacitors/resistors/burned circuitry etc... Please help!Wes