Announcement

Collapse
No announcement yet.

Vestel 17PW20 intermittent backlight

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Vestel 17PW20 intermittent backlight

    Originally posted by shikuru View Post
    Should not R817-R819 give 620kOhm each, even when measured in circuit (and not overload on my multimeter)?
    Yes, they need to be around that. Can't quite remember the exact value. These resistors seem to go occasionally, too.
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.

    Comment


      #22
      Re: Vestel 17PW20 intermittent backlight

      Shikuru,

      I was wondering if you ever fixed this problem? What was the cause? Was it the PSU or the inverter in the end?

      I have a Finlux 32FLD760 with similar-ish problems (uses the same 17PW20v1 PSU).

      I was just coming to the conclusion that I should probably get a replacement refurbished 17PW20v1 board from ebay, but reading your post made me concerned that it was possibly my inverter at fault instead, and that I could find it still didn't work even with a replacement perfect PSU in place.

      Happy to hear your conclusions.

      Mike

      Comment


        #23
        Re: Vestel 17PW20 intermittent backlight

        I know is a old tread but I want to share with everybody my experience with this PSU. https://www.youtube.com/watch?v=S49iIgI-6ac

        Comment

        Working...
        X