Hi guys I am new to this forum but require some advice!
I was watching TV the other night and suddenly picture went but sound and backlight remained fine. After trawling various sites I decided to replace the t-con board (I had also got a repairman out who immediately diagnosed this as the fault). I bought a 2nd hand board off ebay and on replacing this into the set today I have now got picture back! Only problem now is that their is a solid white vertical line at left edge of screen and also one in the dead centre of the display
The 2nd hand t-con was off a Polaroid TV so now I am thinking that either a) the replacement t-con may be faulty or b) as this board was off a different TV then maybe it is not compatible with my set? The replacement has the same part no. as my old one but the barcoded white label at left edge of board does not match my old one whereas a brand new Acoustic Solutions board from **********.co.uk has exactly the same information on white label (ie M$35-D010611-L$KTR7075006KD).
Can anyone help? I also notice with this card from Polaroid TV that picture is also offset so does this mean even although it is the same part no. that it quite simply isn't compliant with my TV and the Acoustic Solutions one may be?
Also phoned up a local, well-known and experienced TV tech and he said that 2nd hand board may have been set up specifically for the Polaroid TV.
Any advice would be greatly appreciated guys as I am tearing my hair out here lol!
I was watching TV the other night and suddenly picture went but sound and backlight remained fine. After trawling various sites I decided to replace the t-con board (I had also got a repairman out who immediately diagnosed this as the fault). I bought a 2nd hand board off ebay and on replacing this into the set today I have now got picture back! Only problem now is that their is a solid white vertical line at left edge of screen and also one in the dead centre of the display
The 2nd hand t-con was off a Polaroid TV so now I am thinking that either a) the replacement t-con may be faulty or b) as this board was off a different TV then maybe it is not compatible with my set? The replacement has the same part no. as my old one but the barcoded white label at left edge of board does not match my old one whereas a brand new Acoustic Solutions board from **********.co.uk has exactly the same information on white label (ie M$35-D010611-L$KTR7075006KD).Can anyone help? I also notice with this card from Polaroid TV that picture is also offset so does this mean even although it is the same part no. that it quite simply isn't compliant with my TV and the Acoustic Solutions one may be?
Also phoned up a local, well-known and experienced TV tech and he said that 2nd hand board may have been set up specifically for the Polaroid TV.
Any advice would be greatly appreciated guys as I am tearing my hair out here lol!
I have checked both ribbons at top of t-con and re-seated bottom cable from main board to no avail, tested continuity of both fuses (pico) on both cards and both fine. All components on both cards look fine visually???
Comment