OK my good man thanks for your helpful advice, I think the 2nd board is faulty and/or incompatible so I will return that and go ahead and order the brand new board.
Thanks for the reply m8 I have checked both ribbons at top of t-con and re-seated bottom cable from main board to no avail, tested continuity of both fuses (pico) on both cards and both fine. All components on both cards look fine visually???
2nd board also faulty or incompatible with my set?
Hi guys I am new to this forum but require some advice!
I was watching TV the other night and suddenly picture went but sound and backlight remained fine. After trawling various sites I decided to replace the t-con board (I had also got a repairman out who immediately diagnosed this as the fault). I bought a 2nd hand board off ebay and on replacing this into the set today I have now got picture back! Only problem now is that their is a solid white vertical line at left edge of screen and also one in the dead centre of the display The 2nd hand t-con was off a Polaroid TV so now...
Leave a comment: