Panel or Main Board?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • chevy56
    Member
    • Oct 2011
    • 17
    #1

    Panel or Main Board?

    I have replaced the T-con board on a Samsung UN55C6500VFXZA and still have the same problem.I would hate to spend more money on a main board if it was the panel.I have seen where some panels cost about $200 how much do you think a panel would cost for this.I'll try to upload a pic.In case it don't the pic is all splotchy and can't make out whats on screen OSD same way
    Attached Files
    Tags: None
    • Toasty
      Badcaps Legend
      • Jul 2007
      • 4171
      #2
      Re: Panel or Main Board?

      Same result on all inputs?

      I had a Panasonic with a similar issue (a lot of green and pink with banding). It turned out to be the main board.

      Is there a chassis number?
      veritas odium parit

        Comment

        • rayrod81
          Badcaps Veteran
          • Oct 2010
          • 205
          #3
          Re: Panel or Main Board?

          A panel for a 55" LED TV would run about $2500- $3000. You will never find a used panel unless you find a non-working TV with a good panel. If the panel is bad then the TV is only good for parts. It could be the main board so if you can find one cheap enough then go for it. You can always resell parts if it turns out to be the panel.
          Last edited by rayrod81; 10-08-2011, 08:41 AM.

            Comment

            • tom66
              EVs Rule
              • Apr 2011
              • 32560
              • UK
              #4
              Re: Panel or Main Board?

              I've seen this problem before, sometimes it can be rectified by going into the menu and selecting a mode other than Movie.
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

                Comment

                • chevy56
                  Member
                  • Oct 2011
                  • 17
                  #5
                  Re: Panel or Main Board?

                  Hopefully alot of people will not make the same mistake I have.I replaced the T-con board with no fix and the only thing left was the main board which I replaced today with same result.If you look at my pic I posted this is a bad panel.Give $20 for TV,invested$230,expensive lesson

                    Comment

                    • Toasty
                      Badcaps Legend
                      • Jul 2007
                      • 4171
                      #6
                      Re: Panel or Main Board?

                      Wow. Hopefully you can get some money back by reselling the boards. Sorry it didn't work out for you.

                      Horrible failure for a less than 2 year old set.

                      Toast

                      [ EDIT: Was that a -new- main board? ]
                      Last edited by Toasty; 10-15-2011, 12:24 AM.
                      veritas odium parit

                        Comment

                        • chevy56
                          Member
                          • Oct 2011
                          • 17
                          #7
                          Re: Panel or Main Board?

                          Yes,new T-con and new main

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • howardc64
                              TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
                              by howardc64
                              All left and right refers to looking from rear of TV (or looking from front with TV upside down)
                              • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
                              • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
                              ...
                              07-24-2025, 05:17 PM
                            • advant
                              Driving a Sharp TCON/panel with a universal main board
                              by advant
                              This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

                              I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
                              02-03-2020, 12:25 AM
                            • Dani_2024
                              Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
                              by Dani_2024
                              Hi and thanks in advance for any input you might provide!
                              I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
                              Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

                              Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
                              5 Photos
                              10-28-2024, 05:06 PM
                            • jb_Bak
                              Sony xbr-65x900c main board issues?
                              by jb_Bak
                              Hey guys great forum glad to have found it. I bought a Sony XBR 65X900C cheaply because it didn't work. No signs of life at all not even a light/led. All I hear is a brief high voltage sound when I throw the power to it.

                              Didn't see any obvious signs of damage so right away started checking voltages. This is what I see:
                              Power Board Connector that goes to Main board
                              CN6401
                              Pin 01 NC
                              Pin 02 NC
                              Pin 03 "BL_ON": 0V
                              Pin 04 "N/C"
                              Pin 05 "STBY 3.3V": 3.5V
                              Pin 06 "GND": N/C
                              Pin 07 "AC_OFF"...
                              09-27-2021, 04:52 PM
                            • JDC
                              (SOLVED) - ONN 100012588 No Power, Then Rebooting After Main Board Change
                              by JDC
                              ONN 100012588
                              Issue: No Power, Then Rebooting After Main Board Change

                              Short answer: replace main board and power board
                              Technical answer: replace main board and Q306 & Q307 on power board.

                              Long answer:

                              TV wouldn't turn on. Power switch was fine which means the main board isn't processing the power on signal. Replaced main board. TV turns on now but randomly reboots. Bad main board? EEPROM? Tried to pull main board and got a shock touching the corner of the board. That's weird. C334 (450V 10uf) capacitor is still holding a high charge....
                              07-15-2022, 07:39 AM
                            • Loading...
                            • No more items.
                            Working...