no power at pin 3 and 4 on IR board CN001 should be about 3 volts only orange stand by light comes on. I tried to attach pictures that may help?
Attached Files
-
-
Re: phillips no picture no sound 42pfl5432d/37
Not much. Still, you get marks for not posting them inline. For future pictures us 'Manage Attachments' below the text entry area; it gives a cleaner look.Originally posted by dwight 1979 View Post
The service manual is at Elektrotanya.
The single most valuable picture you can include would be a sharp, focused picture of the output connector of the power supply, showing the legend on the connector. The single most valuable piece of data is the voltages on that connector.
PlainBillFor a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.
Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.
Comment