Announcement

Collapse
No announcement yet.

Toshiba 32D1333B <Firmware needed>

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Toshiba 32D1333B <Firmware needed>

    Afternoon all I'm wondering if someone has, or could point be in the direction of the correct firmware for the above TV please?

    Mainboard:

    10081192 230724227 457 32"
    27007279 SDILTA320AP33 GB
    V214j3_MB95S(T0S)


    TV turn on/off, green LED flashes tv turn on then off. No rhyme or reason done some research after changed the backlights that its most probably the firmware on the mainboard.

    Any help would be appreciated. thanks
    Attached Files

    #2
    Re: Toshiba 32D1333B &lt;Firmware needed&gt;

    Panel VES315WNDL-01 ???.

    Comment


      #3
      Re: Toshiba 32D1333B &lt;Firmware needed&gt;

      Need to replace whole spi and dump onto new Ic, otherwise it will fail again. I don’t bother with mb95’s and more. Swap it for mb82
      Please Do Not PM My Page Asking For Help Badcaps Is The Place For Advise, Page Linked For Business Reasons Only. Anyone Doing So Will Be Banned Instantly !

      https://www.facebook.com/Telford-Tel...7894576335359/

      Comment


        #4
        Re: Toshiba 32D1333B &lt;Firmware needed&gt;

        Originally posted by yokoono View Post
        Panel VES315WNDL-01 ???.
        Panel is a : LTA320AP33

        Thanks

        Comment


          #5
          Re: Toshiba 32D1333B &lt;Firmware needed&gt;

          Originally posted by ReeceyBurger123 View Post
          Need to replace whole spi and dump onto new Ic, otherwise it will fail again. I don't bother with mb95's and more. Swap it for mb82
          Thanks for this mate, could you let me know a compatible board for this, if possible please?


          Rgds,

          S.

          Comment


            #6
            Re: Toshiba 32D1333B &lt;Firmware needed&gt;

            Guys can I use any mains that uses LTA320AP33 screen, or does the TV model need to be exact also. I have managed to source a 32W1333D mains. Thanks for your time and patience.

            S.

            Comment


              #7
              Re: Toshiba 32D1333B &lt;Firmware needed&gt;

              I have for programmer (flash memory). Is good ?.

              Comment


                #8
                Re: Toshiba 32D1333B &lt;Firmware needed&gt;

                Originally posted by StephenU View Post
                Thanks for this mate, could you let me know a compatible board for this, if posssible please?


                Rgds,

                S.
                ....
                Last edited by StephenU; 05-03-2023, 06:33 AM. Reason: info added to wrong post

                Comment


                  #9
                  Re: Toshiba 32D1333B &lt;Firmware needed&gt;

                  Originally posted by ReeceyBurger123 View Post
                  Need to replace whole spi and dump onto new Ic, otherwise it will fail again. I don't bother with mb95's and more. Swap it for mb82
                  So am I right in saying the SPI chip is bad and the firmware is fine?
                  Ultimately I could remove SPI read and save - then write to new SPI chip?

                  Thanks RB123

                  Comment


                    #10
                    Re: Toshiba 32D1333B &lt;Firmware needed&gt;

                    dont play with spi..... yours tv turn on and off and panel spec saved on it... just play other part of firmware with out mboot. you will be fine.. search over here i upload time ago firmware with out mboot.

                    Comment


                      #11
                      Re: Toshiba 32D1333B &lt;Firmware needed&gt;

                      Originally posted by Diah View Post
                      dont play with spi..... yours tv turn on and off and panel spec saved on it... just play other part of firmware with out mboot. you will be fine.. search over here i upload time ago firmware with out mboot.
                      Thanks I will keep looking.

                      Comment


                        #12
                        Re: Toshiba 32D1333B &lt;Firmware needed&gt;

                        Short update on thread, ordered the 32W model mains and everything worked fine, so I have removed SPI and sent it to be read and wrote to new IC. Will update thread when I have the part back and fitted.

                        Thanks for the help as always.


                        S.

                        Comment


                          #13
                          Re: Toshiba 32D1333B &lt;Firmware needed&gt;

                          UPDATE

                          Got the new SPI back flashed with the firmware from the old IC, but TV still has the same issues. I have put in the 32W1333D mains in for now as it works fine with this. Just need to use without DVD function.

                          Thanks for all the input.

                          rgds

                          S.

                          Comment

                          Working...
                          X