Re: Samsung UE49MU7470U LED backlight issue causing shadow?
why not to buy a bed at work? it's nice to sleep! :-)
why not to buy a bed at work? it's nice to sleep! :-)
-
-
Re: Samsung UE49MU7470U LED backlight issue causing shadow?
Ah ok having read the thread again I think the advice is to strip it down to the panel and check if they're burnt and also to get the codes for the LED's before ordering them.
I'm going to buy suction cups next week and will strip it down Saturday/Sunday night at work.
Thanks again one and all.Comment
-
Re: Samsung UE49MU7470U LED backlight issue causing shadow?
Your going to find the diffuser is marked cos if your strip has been working with a faulty LED, the others will have been running hotter than normal. If you have enough room to store the dismantled set, Id get the suction cups and dismantle before buying strips so you can check diffuser. If you dont want to buy cups, try siding a large piece of cardboard below screen and lift it that way. Luckily I have a seller 20mls away and I can run up and get the strips for a quick turnaround. Check CGTV on ebay.Comment
-
Re: Samsung UE49MU7470U LED backlight issue causing shadow?
Thanks for the advice.
At the moment it’s got its back panel off and is stashed at work on the top deck of the stores. I’m buying suction cups on Thursday and will start stripping it down Saturday night. I’ve already ordered the LED strips Sonys advised me to. They’re on a slow boat from china so will be here in a couple of weeks.
If the diffuser is burnt/scorched will that need replacing too? They must be pretty cheap surely? I dont imagine they have a part id so must be readily available from lots of places?Comment
-
Re: Samsung UE49MU7470U LED backlight issue causing shadow?
Ok lads the LED’s have arrived.
I’m back at work Sunday so that’s the moment of truth!
I hope work don’t expect a lot of actual work from
me Sunday or else I’m going to complain to HR!Comment
-
Re: Samsung UE49MU7470U LED backlight issue causing shadow?
We have a result.
The process of stripping it down was easier than I thought and with the help of another lad at work we had it down to chassis in an hour or so. As soon as we revealed the LED strips it was clear there was an issue with one of them fractured from
It's rail. Swapped the pair of strips, built back up and it's good to go!
Chuffed to bits with myself. And thanks to sonys and Diah for the help!Attached FilesComment
-
-
This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...09-07-2024, 05:50 AM
-
Hello,
I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some time—like after playing a game—the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.
I'm using the Samsung 740n monitor drivers instead of the default plug-and-play... -
Hello.
My TV is a QE65Q800TATXXC Samsung TV.
Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
Any ideas to check would be very appreciated 😊
After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump... -
I purchased a used Samsung TV model UA65JS9000W recently knowing it had an issue with the screen. When switched on the picture was bright both sides of the screen but a little darker in the middle of the screen. Thinking this was the back lights (side mounted LCD strips) I replaced these, however the issue is still there. I am now thinking it may be a TCOM issue, but am not sure, any advice on this would be appreciated. Also whilst changing out the back lights I noticed the the thick clear plastic sheet (maybe 1.5 to 2mm thick) below the diffusers there is cracking (up to 75mm) on the sides and... -
Hi all,
Because of two bright spots and a couple of dark spots I decided to replace the backlights in my Samsung UE48JU7000. See attached photos:
I thought all went well, but after full assembly and testing it out it turns out not all is fine. The backlights are completely fine but I have some weird issues on the right half of the screen. Since I didn't really touch the T-CON board (apart from taking out the ribbons of the display and reconnecting them on assembly) it would be weird that the issue is with the T-CON board... But based on the behavior of the service...
Comment