Samsung UE50TU8070UXZT bootloop display problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • fanaticgames
    Senior Member
    • May 2017
    • 138
    • italy
    #1

    Samsung UE50TU8070UXZT bootloop display problem

    Hi guys I have a problem with this TV, once it is turned on it restarts continuously (only the backlight is present, no image), by disconnecting the flat of the display it remains on regularly, can I solve it with scotch tape? What slopes of the flat can I cover?
    Attached Files
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12305
      • U.S.
      #2
      Re: Samsung UE50TU8070UXZT bootloop display problem

      https://www.youtube.com/watch?v=pfrRhw7-ZII

        Comment

        • fanaticgames
          Senior Member
          • May 2017
          • 138
          • italy
          #3
          Re: Samsung UE50TU8070UXZT bootloop display problem

          Originally posted by nomoresonys
          https://www.youtube.com/watch?v=pfrRhw7-ZII
          yes but I can't find the tracks of the clock signal

            Comment

            • howardc64
              Badcaps Veteran
              • Jun 2017
              • 650
              • United States
              #4
              Re: Samsung UE50TU8070UXZT bootloop display problem

              Originally posted by fanaticgames
              yes but I can't find the tracks of the clock signal
              Posted a slide summary on Samsung 4K panel connections. Can help you understand what all the flex connection pins are

              https://www.badcaps.net/forum/showthread.php?t=118541

                Comment

                • fanaticgames
                  Senior Member
                  • May 2017
                  • 138
                  • italy
                  #5
                  Re: Samsung UE50TU8070UXZT bootloop display problem

                  Originally posted by howardc64
                  Posted a slide summary on Samsung 4K panel connections. Can help you understand what all the flex connection pins are

                  https://www.badcaps.net/forum/showthread.php?t=118541
                  the problem is only on the right cof, isolating 1 ckv signal you get an image but not acceptable, unfortunately the panel has to be thrown away, samsung rubbish
                  Last edited by fanaticgames; 04-28-2023, 05:02 AM.

                    Comment

                    • fanaticgames
                      Senior Member
                      • May 2017
                      • 138
                      • italy
                      #6
                      Re: Samsung UE50TU8070UXZT bootloop display problem

                      With scotch tape, I think the lines next to it didn't make contact, I cut the pcb directly on the ckv signals of the right cof and I got an excellent result, there is only a thin line that comes out intermittently every 10 seconds
                      Attached Files

                        Comment

                        • howardc64
                          Badcaps Veteran
                          • Jun 2017
                          • 650
                          • United States
                          #7
                          Re: Samsung UE50TU8070UXZT bootloop display problem

                          Originally posted by fanaticgames
                          With scotch tape, I think the lines next to it didn't make contact, I cut the pcb directly on the ckv signals of the right cof and I got an excellent result, there is only a thin line that comes out intermittently every 10 seconds
                          This document explains fixing CKV lines on slightly older Samsung TVs. It talks about strap CKV* and CKVB* pairs after disconnecting from the panel. Also possible connect them to GND or VOFF. This is more advanced than I understand. Just FYI

                          https://www.electronica-pt.com/esque...-repair-65862/

                          This video explains CKV* and CKVB* (B=Bar or inverted signal) are generated from the same source. I guess above author is expecting a fault before CKV/CKVB pair is generated. However, for these newer Samsung Panels, CVK/CKVB comes directly out of the single SOC on main so maybe no longer fault in pairs... I don't really know.

                          https://youtu.be/izd7dhtmZjc?t=879
                          Last edited by howardc64; 04-28-2023, 05:00 PM.

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • alro7779
                              Samsung UN55MU6103F video problem; has colored stripes on the display
                              by alro7779
                              Hello, everyone!

                              A co-worker gave me a 55-inch Samsung TV model UN55MU6103F so I can try to fix the following problem... As soon as I plug it in to the wall, the TV turns on, and the display shows a few stripes all over the screen. I took off the back cover and disconnected both ribbon cables that go to the display (one at a time) so by doing that I can narrow down the bad section of the problem, but in both cases the display turns black. I know there are some voltages that I have to check (VGH, VGL, etc.) but don't know what reading each has to show. If anyone could guide me on this,...
                              09-27-2025, 11:29 PM
                            • KYBOSH
                              Samsung QN75Q70TAF - Problem ON or WITHIN the Display??
                              by KYBOSH
                              Came across a 75" QLED TV with restart-backlight no boot and it was headed to the dumpster. Asked the owner to let me have a crack at it. They said the TV went out during or soon after a thunderstorm. I noted this but didnt out too much stock into it as it could have been anything.

                              VERY big TV and i was worried about the display cracking during the moved as well as the repair but it was alright as i try very hard to handle with care.

                              In the video (zip file) you can see' as the TV tries to start up, tbere are a lot of gaps in the backlight so I immediately suspect...
                              10-19-2023, 05:33 PM
                            • stylishconsultant
                              un60j620dafxza - Samsung No Display Problem
                              by stylishconsultant
                              Hi All,

                              Need help.

                              I have a samsung un60j620dafxza led tv. When I plug it in it has no display, no sounds, and no standby lights.

                              So I opened the tv and disconnected the power to the mainboard and the backlight powered up. This according to many people says that this is a mainboard
                              problem. I checked the voltage coming from the stb and I read 1.3 volts on pins 1,3,5 and 7 which are low volts instead of 13 volts which i think the lcd panel
                              might be drawing too much power from the power supply that it prevents the right voltage going to the mainboard....
                              09-04-2024, 03:26 AM
                            • Roccolade
                              Samsung QE50Q67T bootloop problem
                              by Roccolade
                              Hey everyone.

                              I have a Samsung QE50Q67TAUXXC (same as Q60T i think) which is experiencing constant bootloop. The picture comes on at first but then it begins to reboot again and again. I tried taping off the pins one by one on the ribbon-cable connecting the two panels at the bottom - and found that the bootloop stops when 1st pin from the left is taped off and the same if the 46th is taped off. (See picture). But unfortunately, I get no image on the screen in those cases.
                              The bootloop also stops when the whole right side is disconnected. Which makes me believe the problem...
                              09-02-2023, 02:16 PM
                            • Neptune06
                              Display problem on a Samsung U28E590D
                              by Neptune06
                              Hello,

                              I have a display problem (bad size and color) on a Samsung U28E590D and i'm wondering if someone have access to the service manual for this monitor. I used a faulty Lenovo thunderbolt hub connected to it and now i suspect a problem on the HDMI part of this monitor. The main PCB board part number is: BN94-10748G.

                              Thanks for your help.
                              10-02-2023, 05:30 AM
                            • Loading...
                            • No more items.
                            Working...