Lg Oled error codes (LG oled 55B9PLA)

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • llonen
    Badcaps Veteran
    • Sep 2014
    • 495
    • hampshire
    #1

    Lg Oled error codes (LG oled 55B9PLA)

    I am going to go and look at a LG oled 55B9PLA television shortly, about the only information I have so far is the set fails to start up and there is two flashes from the power LED. The customer has replaced the power supply board with no changes in sets behaviour, any thoughts please as I rarely work on LG Oled simply because there was not much uptake of this display technology.


    Thanking you in advance
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • michalk3777@gmail.com
      Sharp Hisense - LC-65N7004U Error codes
      by michalk3777@gmail.com
      Hello, looking for a list of error codes for this TV. made in 2020, its manufactured by Hisense under Sharp brand. No clicks, black screen, no sound, power light is on solid. When I press power, it blinks 5 normal blinks and 1 short. and nothing happens.
      Anybody has a list of error codes that might apply to this TV? I have not opened it yet.
      Regards,...
      12-15-2024, 09:20 PM
    • Sus256
      HISENSE 65E7KQ PRO - no boot
      by Sus256
      Hi all!

      HISENSE 65E7KQ PRO
      RSAG7.820.13512 - chassis
      MT9618BAATAB - cpu
      RSAG7.820.12059 - power
      HD650Y3U77 - panel
      KLM8G1GETF - emmc

      The TV does not turn on, the standby indicator is on. All voltages are present.
      Emms is dead. Not readable, not detected.
      Replaced emmc.
      But with another dump there is no launch

      Terminal log

      UART
      <
      AC_ON
      RPMB key is not yet programmed

      HASH1_VERSION=0x00000000 64bit
      E-B
      FDE enabled
      layout pattern onebin by SAR7,0...
      06-01-2025, 02:11 AM
    • mecha1166
      QN750Q8FNBFXZA Service Error Codes Needed - Error code 1-3-1-2 ? Dead set, only blinking standby light in repeating sequence
      by mecha1166
      I am working on a QN750Q8FNBFXZA. Dead except the standby light. It blinks what appears to be 1 3 1 2. 1 long blink, pause, 3 short, pause, 1 long, pause, 2 short, pause, repeat. A service manual would be very helpful, or if anyone knows these error codes. Thanks!
      03-28-2024, 08:31 AM
    • Przmx
      Asus Vivobook S14 Flip OLED TP3402 AFUWINGUI memory dump error for decoding lost BIOS password
      by Przmx
      Hello everyone,

      I'm an owner of an Asus Vivobook S 14 Flip OLED TP3402 laptop (TP3402ZA-KN063WA)
      with serial number: NBN0LP019584459
      and I lost the BIOS password that I set in this laptop one year ago.

      I tried to recover the password using the AMITSESetup method described on the forum. I found that it is possible by software to obtain the BIOS file from my computer (afuwin.rom), but when trying to do so in AFUWINGUIx64 I received the error number 31 "Unable to read contents from specified file" shown in the attachment. I don't have a programmer,...
      06-01-2024, 12:12 PM
    • Superbee_dad
      Sharp 80” long short flash backlight error - Help
      by Superbee_dad
      Hello Sharp TV experts
      Our Sharp LC-80LE642U displays one short one long flash error code which is a backlight error. I went into service mode and there were 8 lamp error counts recorded. I reset the count to 0 and did a reset. The last monitor error cause was 16 B00014639:12. 16 is the code for backlight error. I tried to power the tv up but went back into error mode.

      > I checked voltages on the power supply board and they all check out .. including 3.28 volts at the error pin.
      > There is power to the cpu and T-CONN and no faults found there. The cpu has a flashing...
      01-24-2025, 11:51 PM
    • Loading...
    • No more items.
    Working...