Announcement

Collapse
No announcement yet.

Service Menu Programming

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Service Menu Programming

    Hello

    I have a Vizio V585-H11 that I replaced the Main and Tcon board and now it's giving me a swapped image. I can get into the service menu and change the panel but it doesn't seem to have any affect on the TV. However, I'm hesitant to try every option because I don't want to set it to something that doesn't display anything and not be able to change it back. Is it possible I got the wrong TCON/Main board version and that's why the picture looks like this?
    Attached Files
    Tags: None
    #2
    Re: Service Menu Programming

    why you swapped MB and T-CON ?normally one part should defect or !!! can you show us the original T-CON

    Comment

      #3
      Re: Service Menu Programming

      Originally posted by Diah View Post
      why you swapped MB and T-CON ?normally one part should defect or !!! can you show us the original T-CON
      usually yes that's the case. however, had a dead main on arrival and swapped that only to find out that there was still no picture. after that i disconnected one of the panel ribbons and got a white screen on one side and picture on the other. did the other side and the white screen swapped as I expected but there was static on the other side so I decided to swap the tcon as well. I'll upload pics of original tcon and new one momentarily.

      Comment

        #4
        Re: Service Menu Programming

        Originally posted by Jeryswan View Post
        i disconnected one of the panel ribbons and got a white screen on one side and picture on the other. did the other side and the white screen swapped as I expected but there was static on the other side
        so now with this placement t-con you need to disconnected the ribbon on this side where it before show static. of course it will be white but we need to know if you have clear image on the other half.

        Comment

          #5
          Re: Service Menu Programming

          Originally posted by Diah View Post
          so now with this placement t-con you need to disconnected the ribbon on this side where it before show static. of course it will be white but we need to know if you have clear image on the other half.
          Yes there was a clear image on the other half

          Comment

            #6
            Re: Service Menu Programming

            here are the original boards and their replacements
            Attached Files

            Comment

              #7
              Re: Service Menu Programming

              Originally posted by Jeryswan View Post
              Yes there was a clear image on the other half
              how about when you reverse the ribbon the static side will show also clear or static

              Comment

                #8
                Re: Service Menu Programming

                in case when you reserve and there was static picture the issue at panel... but if it was clear picture then you can swap or dump / write the U8603 on MB i think its 25Q xxx spi... if my eyes correct then all setting are saved on it. but be sure its not the one dead on original MB

                Comment

                  #9
                  Re: Service Menu Programming

                  Originally posted by Diah View Post
                  in case when you reserve and there was static picture the issue at panel... but if it was clear picture then you can swap or dump / write the U8603 on MB i think its 25Q xxx spi... if my eyes correct then all setting are saved on it. but be sure its not the one dead on original MB
                  You were right. the main board didn't need to be replaced. put the old one in and it displayed the correct picture. thanks dude!

                  Comment

                    #10
                    Re: Service Menu Programming

                    So problem was bad tcon, original mainboard was good, if I understand it correctly.

                    Comment

                      #11
                      Re: Service Menu Programming

                      Originally posted by Jeryswan View Post
                      You were right. the main board didn't need to be replaced. put the old one in and it displayed the correct picture. thanks
                      you welcome

                      Comment

                        #12
                        Re: Service Menu Programming

                        Nice work Diah, another perfect example of think and do the most logical simple things first...before diving into random rabbit holes.

                        Comment

                        Previous template Next
                        Working...