Re: Philps QLED Q60B Model:QE65Q60BAU
If you want to test immediately the panel state then jump a 12v to the tcon fuse and disconnect the mb-tcon lvds cables, then turn on
-
Re: Philps QLED Q60B Model:QE65Q60BAU
funky looking tv, that back center speaker is crazy
Leave a comment:
-
Re: Philps QLED Q60B Model:QE65Q60BAU
Thanks for the reply how to do it if you can explain ?Leave a comment:
-
Re: Philps QLED Q60B Model:QE65Q60BAU
You first need a service firmware for this chassis for recovery, if it doesn’t help, then you will have to look for a working motherboard, since you are unlikely to be able to do anything with an eMMC dump.Leave a comment:
-
Re: Philps QLED Q60B Model:QE65Q60BAU
Now I know what happened : those who threw this TV have just bought a SAMSUNG and wanted someone to take care of their old TV because it was really well packed plus the sets look pretty nice I have to thank them. Now back to our problems here are some pictures. Davi.p you think an update might fix the problem? otherwise, Mboard is to be changed. Now it is open and we can invistigate to confirm
what would you suggest?Attached Filesif you find these attachements useful please consider making a small donation to the site
Leave a comment:
-
-
Re: Philps QLED Q60B Model:QE65Q60BAU
no problem, the model can be found on searches, if you are not familiar with software reprogramming you could try an update via usb, few chances, or mb replacementLeave a comment:
-
-
Re: Philps QLED Q60B Model:QE65Q60BAU
Post the correct model code for other one's reference, please, not photo... You probably have bad backlight togheter with bad mainboard, hard battle!Leave a comment:
-
Re: Philps QLED Q60B Model:QE65Q60BAU
Yes, download the video to see the exact problem.Leave a comment:
-
Re: Philps QLED Q60B Model:QE65Q60BAU
Hi Lotas you are very observant and you are right now I see that it is a completely different designation :65PUS6521/12
can i change the title so that it is correct for the others . it is a free found television if it is Samsung or Philips most important is to find the problem to enjoy it if possible. want to download a Video to show the behavior on this tv and maybe get some help from you guys to fix the error
it's pretty big and heavy to handle but you might give me some clue as to what might be wrong with itLast edited by bohaboha; 03-29-2023, 04:42 PM.Leave a comment:
-
Re: Philps QLED Q60B Model:QE65Q60BAU
yours TV from 2016... find friend to help you to take out the screen apart you have BL issue.Leave a comment:
-
Re: Philps QLED Q60B Model:QE65Q60BAU
Model: QE65Q60BAU is a model from Samsung, Philips should have a different designation.Leave a comment:
-
-
Re: Philps QLED Q60B Model:QE65Q60BAU
yours photo its look there are issue at LED BL so some of logo dim
post stable focused video on the front screen at start upLeave a comment:
-
Philps QLED Q60B Model:QE65Q60BAU
hi all what do you guys think about these symptoms ? so soon as i plug the cord it shows the logon nonstop like in a loop .tries to turn it off with the remote but it does not respond i have to remove the cord to turn it off. a big heavy new TV for which I seek advice from you before I open it.found in the environment cabin in original package with remote control and electric cord maybe transport damage it looks to be unused.
the screen looks to be ok or what do you guys think?
Any advice or suggestions are greatly appreciated.
Can i upload a video here?Attached Filesif you find these attachements useful please consider making a small donation to the site
-
-
This specification for the Samsung 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U Chromebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U boardview and 13.3IN CHROMEBOOK 2 8GB/128GB FHD QLED MERCURY GRAY I3-10110U schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help...09-07-2024, 12:10 AM
-
Hello all, I've been looking into this portable air conditioner's remote control and can't find what could be causing the problem - or possibly this remote is just terribly designed.
The remote only works at exactly 3V - if I drop it any lower, using my bench power supply, to say, 2.9V then the remote will not flash the display and turn off. I don't have any AAA batteries that are exactly 1.5V each so I'm not sure if this remote is designed this way - to only use the freshest possible batteries, or if there's a failed component in the mix.
I can't find any schematics... -
Hello everyone,
I was wondering if anyone could help my in pairing a remote with a Toshiba fire tv?
The Tv model number is: 50lf711u20 Rev B.
I've already replaced all the the circuit boards within the tv along with the I.R. sensor receiver.
I've tried 3 different remotes which should be fully compatible with this TV.
Oddly enough. A few if the buttons on all of the remotes actually work. Even without pairing...which makes no sense.
The power button, along with the volume,back,select, and directional... -
Hi! I have this TV set that does the following:
1) I press the red power button on the remote
2) The TV turns on normally
3) After that it won't take any other command from the remote, neither power off, volume, channel, NOTHING
4) We need to either pull the main cable or use the built in button at the bottom to select funcion OFF
Then after it's off, it would again accept the TURN ON from the remote and same again
BUT:
-The remote does show the correct IR beam while observed thru a phone camera
-The TV works fine while using the MiRemote... -
I’ve got a subwoofer that I’ve had for nearly 20 years, it did come with a basic remote which I’ve lost. It’s a generic make of subwoofer, I can’t see a brand sticker on it. It comes with 2 speakers.
Question recently I’ve connected it up to my tv which has greatly improved the sound on my tv, however I’d like to be able to mute the subwoofer when ads come on or just mute it when the phone rings etc. I tried using a cheap all in one tv remote on the subwoofer and the volume button would only work to increase volume but not turn it down or mute it
Is there...
Leave a comment: