Philips 46FPL8605 reboot sometimes

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Modelvincent
    Member
    • Jun 2015
    • 10
    • France

    #1

    Philips 46FPL8605 reboot sometimes

    Hi,

    I'm still having a problem with my philips 46FPL8605 TV.

    It works correctly most of the time, but sometime, the screen goes black, the ambilight led do some scrap, then after some seconds the audio shutdown and the TV restart.

    After that, my freebox pop says me that the HDMI has been disconnected.


    This is not a temperature problem, sometimes, it appears just after startup, sometime after 1 hour. Sometimes it reboots 1 ou twice in 4 hours, sometimes it's 4 time in less than than 1hour...


    I've build a serial logger on the debug port with a raspberry pi the log is joined to this post.

    On a previous post, someone says me to change 2 mosfet on the board, but it had no effects.

    Thank for your help,

    Best regards

    Vincent
    Attached Files

Related Topics

Collapse

  • spice_disc
    Vizio TV M50-C1 reboot cycle and static on screen
    by spice_disc
    I'm currently trying to diagnose and fix my Vizio TV (Model M50-C1). I've tried a number of different basic solutions, but I'm trying to determine if my issue is currently a failing panel, T-Con board, or main board (or something else entirely) and whether or not it is worth my time to fix it. Details of the issue and what I've tried are below as well as why I think it is either a bad panel, T-Con board, or main board.

    The Issue: The TV will be on and working fine but after the TV is on for ~5-10 minutes the screen will freeze (with sound continuing) until the TV reboots itself. While...
    09-08-2024, 02:37 PM
  • aidanmo
    Philips 43PUS7506/12 - Loud blown out sound
    by aidanmo
    Hello,

    I've got a really strange issue with the speakers on my Philips 43PUS7506/12. It makes this awful loud buzzing now. It happened after it was attempted to be wall mounted - I think the back got squeezed and something broke.
    I thought maybe the speakers got damaged, so I replaced them - no dice.
    • Using the internal speakers, it always happens.
    • Using the headphone jack, it never happens.
    • Using the digital/optical out with a soundbar - it happens after about 2h/movie runtime - it's never as drastic, it just pops in and out, but I didn't want it to damage the sound bar
    ...
    02-28-2025, 03:13 PM
  • kevin_allein
    Samsung GU58TU7199 reboot loop
    by kevin_allein
    Hi, I have two identical Samsung GU58TU7199, which both had the reboot loop. On that model TCON is integrated into the motherboard and there is only one FPC cable, which goes to a driver board driving half of the panel (left side seen from the rear of the TV) and than another FPC cable connecting left side to the right side.

    The first one was easy, once I disconnected the FPC between left and right the TV did start up. I soldered a bridge on the motherboard on the test points as found here in the forum or on Youtube and half of the screen was coming up. I than tried the CK1..8 lines...
    03-24-2024, 12:19 PM
  • Terrotiste
    Philips 480FH6300 logo and reboot ...
    by Terrotiste
    Hello everyone

    I have a new Philips TV to depanner reference 48pfh6300 / 88 ...

    When TV is plugged in, lights up and displays the Philips logo, then turns off and on again and this at the end ...

    I flashed according to the files that gave me by philips, it seems he takes the firmware on the USB key, but when I turn it on it does not propose to update the tv ... it turn in a loop on the logo

    Does anyone have an idea, knowing that this tv is new ...?

    Thanks for your help very much

    Cordially...
    01-25-2019, 05:56 AM
  • Cornito
    Philips 50PUH6400 bad color and gosting / slow motion on one side
    by Cornito
    Hello Team,

    New issue on LCD panel where I need to find out the cause and the potential solution.
    This is on the Philips 50PUH6400, the LCD panel is an INNOLUX V500dk2 xrs1.

    I have image, on the right side, the image is more or less normal even if there is a small blur on edge, on the left there is an issue.
    When moving up and down in the menu on the right the image is slow to disappear, and is darker, like red/brown.

    I've checked voltages, no issue found comparing right and left side of the panel driver.
    VHG VGL CKV... are the sames on...
    03-08-2024, 06:41 AM
  • Loading...
  • No more items.
Working...