Samsung "MU" series (UN, UA, UExxMUxxxx) fault dump IC1604 25Q40...

[lotas]

Interesting...
All voltages are present, but the indicator does not light up.
However, when I try to flash the SPI with a working firmware from a similar model, the indicator lights up, but there is no startup...

Then check what status register is set, maybe it has crashed (it should be 0x88, 0x42).

[yureyko]

Your dump is working, the problem is different...

Interesting...
All voltages are present, but the indicator does not light up.
However, when I try to flash the SPI with a working firmware from a similar model, the indicator lights up, but there is no startup...

[SMDFlea]

The thread title has been renamed to Samsung "MU" series (UN, UA, UExxMUxxxx) fault dump IC1604 25Q40...

[lotas]

Greetings friends,

i have a Samsung TV UE40MU6402U with board BN41-02568b
The problem is that i have no standby
I thint that maybe the problem is software related since i have voltages in board.
I read the IC1604 (W25Q40CL)
Propably problem is the IC1604 but i read all of them.
If someone knows or have software to help please you are welcome.

Thanks in advance for your time and your help.

Your dump is working, the problem is different...

[yureyko]

Greetings friends,

i have a Samsung TV UE40MU6402U with board BN41-02568b
The problem is that i have no standby
I thint that maybe the problem is software related since i have voltages in board.
I read the IC1604 (W25Q40CL)
Propably problem is the IC1604 but i read all of them.
If someone knows or have software to help please you are welcome.

Thanks in advance for your time and your help.

[lotas]

Thanks Iotas. It works fine!

Ok!

[ducky29]

Hi, try the working dump.

Thanks Iotas. It works fine!

[lotas]

Hello Iotas. Can you please check this dump? UE43NU7022K. Thank you!

Hi, try the working dump.

[ducky29]

Hello Iotas. Can you please check this dump? UE43NU7022K. Thank you!

[lotas]

Hello! My TV is a Samsung UN43MU6100G from board BN94-12431J, CODE: BN41-02568B.Dump from this! Could you help me a fix this problem? This TV in standby stay blinking and not turn on!

Your dump is fine, it works, the problem is different.

[David Rocha]

Hello! My TV is a Samsung UN43MU6100G from board BN94-12431J, CODE: BN41-02568B.Dump from this! Could you help me a fix this problem? This TV in standby stay blinking and not turn on!

[DJJaro]

Hello. I have broken IC1604 from board BN94-12432B.Dump from this threed not working. Is possible fix? Thank you.
Edit: solved, must be changed status register. Board working OK, thank you.

[srdi]

Телевізор не включається, немає режиму очікування! SAMSUNG UE55MU6172

The TV does not turn on, there is no standby mode! SAMSUNG UE55MU6172

[lotas]

Big thanks for help, everything works. Happy New Year!

Ok! Happy New Year!

[Beard dwarf]

Try these dumps for t-con (25q80).

Big thanks for help, everything works. Happy New Year!

[lotas]

Try these dumps for t-con (25q80).

[lotas]

If this is not the original dump, then why is it also corrupted? I hope this is the original. Maybe you're right.

A working Dump is damaged immediately after power is applied, if the status register (0x88, 0x42) is not set after writing; if the service center did not do this, then it is damaged again.

[Beard dwarf]

What is the motherboard number BN94-xxxxx, and what is the panel number CYxxxxxx?

If the TV was already at the service center, then it is possible that the 25Q40 already had a non-original dump, maybe they tried to program it without saving the original one..

BN94-12398F
CY-KK040HGNV2H

If this is not the original dump, then why is it also corrupted? I hope this is the original. Maybe you're right.

[lotas]

Thank you, lotas, but it didn't help.
This is my home TV. When it broke, I took it to a service center. They diagnosed it as a broken processor.
I repair other electronics and am not an expert in TVs, but this seemed strange to me. So I decided to try it myself.

In 25q40, I found that the firmware start was missing and searching the forums suggested that this was a common problem. But fixing this problem resulted in the standby voltage appearing, the TV started to turn on, but there was no image.
Scratches on 25Q80 indicate that they tried to flash it without unsoldering it. This makes me think that I will have to further improve my skills in TV repair.

What is the motherboard number BN94-xxxxx, and what is the panel number CYxxxxxx?

If the TV was already at the service center, then it is possible that the 25Q40 already had a non-original dump, maybe they tried to program it without saving the original one..

[Beard dwarf]

Try.

Thank you, lotas, but it didn't help.
This is my home TV. When it broke, I took it to a service center. They diagnosed it as a broken processor.
I repair other electronics and am not an expert in TVs, but this seemed strange to me. So I decided to try it myself.

In 25q40, I found that the firmware start was missing and searching the forums suggested that this was a common problem. But fixing this problem resulted in the standby voltage appearing, the TV started to turn on, but there was no image.
Scratches on 25Q80 indicate that they tried to flash it without unsoldering it. This makes me think that I will have to further improve my skills in TV repair.