Sharp LC52D62U Pwr Supply RDENCA184WJQZ

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rviani
    Member
    • Dec 2022
    • 12
    • United States
    #1

    Sharp LC52D62U Pwr Supply RDENCA184WJQZ

    Anyone know the correct output voltage of this board to the inverters? This board is used in many 42" to 62" Sharp Aquos (2005 - 2010 era) TVs. Also known as ZEBRALC605-4001CC.

    SOMEONE must have this data - help gratefully appreciated.

    Thanks in advance.
    Ron
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12123
      • U.S.
      #2
      Re: Sharp LC52D62U Pwr Supply RDENCA184WJQZ

      this is the same tv as your other thread right, you don't need to create another thread, can you see why? because all the other progress or details about what has already been done is lost and it will just take longer to sort out, so just post in original thread, it will bump up to the front.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          ORIGINAL POWER SUPPLY BOARD
          7 Photos
          11-22-2024, 01:46 PM
        • sam_sam_sam
          Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
          by sam_sam_sam
          I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

          One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
          03-31-2024, 02:12 PM
        • scubacamper
          Sharp Aquos LC-70C6400U Half Screen Dark
          by scubacamper
          I found another post on this site the other day which has been very helpful in troubleshooting this issue I am having with my tv. The left half of the screen is dark, and the other half is VERY slow to generate it's image - and it only generates part of its image at that.
          Based on this yt video, I have narrowed it down to an issue (short?) on the left side of the display, somewhere in the system of ribbon cables.
          when I remove the bezel and the rear cover, I can get the image to display correctly by manipulating the ribbon cables on the left side which connects the left lower display...
          https://youtu.be
          05-03-2025, 12:19 PM
        • sam_sam_sam
          Modification to a ZD-987 desoldering/soldering station using a external switching power supply
          by sam_sam_sam
          I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

          I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
          07-01-2024, 06:34 AM
        • timtrace
          Won't stay powered on - Sharp LC52LE700UN with RDENCA336WJQZ DPS-286AP power supply
          by timtrace
          Greetings - first post. I'm awed that a forum like this exists. It's a dream come true. I'm not even kidding.

          I've got a 13 year-old Sharp LC52LE700UN television that's developed a problem of powering itself off after 30-45 seconds. If I pull the mains cord and reconnect, it will come back on right away without so much as a button push...then turn off after 30-45 seconds.

          Service manual S37X3LC46E77U is attached to this post, as well as a front and a back picture of the RDENCA336WJQZ DPS-286AP power supply taken after completing my work.

          Each time that the...
          05-14-2020, 09:24 PM
        • Loading...
        • No more items.
        Working...