Hi,
Need Canon ST4905 resetter.
Please reply, am waiting for st4905 download link
Need Canon ST4905 resetter.
Please reply, am waiting for st4905 download link
-
-
Re: Need Canon ST4905 resetter
try with this -
Re: Need Canon ST4905 resetter
try thisComment
-
Re: Need Canon ST4905 resetter
What does a Resetter do please?Comment
-
Re: Need Canon ST4905 resetter
Dexter, sorry for the delay
ThankyouComment
-
Re: Need Canon ST4905 resetter
Are these just executable files ?
Is there such a thing for the Canon TS3300 ?Comment
-
THANKSSSSSSSSComment
-
hello... i need st5306 resetter.. can you send me if you have ?04-20-2021, 04:33 PM -
Hi all,
since my second device of this model number now died due to Canon being service unfriendly, I'd like to reset the counter myself.
This model of printer seems to be on non of the eBay sellers and other suppliers support lists for the Canon Service Tool. Other forums suggested the v5103 version of the tool, which did not work unfortunately.
Has anyone maybe experience with this exact model?
Thank you!07-02-2025, 07:46 AM -
Hello, I have a Canon TS8350 printer. The problem is that when I turn it on, "CANON" appears on the screen, but it never goes away. You can leave it on for a whole day, and it doesn't go away. Does anyone know how to fix this? I've tried unplugging it, but nothing. I've also tried holding down POWER, but nothing. In fact, once it turns on, it can't be turned off with the Power button. I've also held down Power and then plugged it into the Power supply, and the power light flashes once and doesn't turn on, but then when I press Power again, it turns on. Currently, it's a nearly new paperweight,...05-07-2025, 12:26 AM -
Dear folks, recently got a canon dr-1210c and it worked perfectly just for one day. Right now it shows all possible errors on the screen and do nothing. I tear down the device and found a 32 pin plcc flash chip. I thought reprogramming firmware might be helpful. The firmware update file from canon support include a dll file which doesn't help. So if anyone has the dump it would such a great favor to share.04-15-2025, 02:43 PM -
hi,
I've here this printer that is "locked" because Ink Absorber waste ink Counter is full so when I power on it give a sequence of 7 blinking orange LED in sequence with green power ON led.
Reading a lot over Internet it seem that is an "use&trash" model so there isn't a way to reset manually this counter and also seems that it is not possible to enter in Service Mode status to reset with Canon Service Tool utility.
This is really suck because I cleaned already the printer and bought both new cartridges!!!
Working around for a while I finally...
Comment