PLZ I NEED DUMP EEPROM TONER TL410X
FOR PANTUM M7100DN PRINTER
CAN SOMEBODY HELP ME TO RESET THIS PRINTER PLZ.!
FOR PANTUM M7100DN PRINTER
CAN SOMEBODY HELP ME TO RESET THIS PRINTER PLZ.!
Attached Files
-
-
maybe this is usefull?
https://orpys.com/en/content/276-pan...m7100-firmware -
plz help me for an nochip_firmware
to fix my printer pantum m7100 dnComment
-
Comment
-
for all printer and firmware modification experts
I've been working on the above named printer toner chip trying to read with ch341a and other devices but seemingly the chip burns after a while and needs to be replaced and printer doesnot get ready
anyone can help about this printer chip or firmware modification ways
...
08-16-2022, 09:07 AM -
Hello all, as the title says, I'm very much in need of a valid firmware dump of a Anycubic Photon 5.5 3D resin printer. It's stored in a Winbond 25Q32, so it's 4Mbyte.
Here's a little background for my request. A few weeks ago I bought this 3D printer from a guy who had moved on to a PLA printer. I got it at a vey reasonable price, as it was in a defective state. The seller told me that he had experienced a power failure during a firmware upgrade, after which the printer appeared to be dead. He thought the firmware was corrupted in such a way that the printer was now bricked. As he... -
hello friends,
i'm searching for the dump Samsung sl-m2022w in order to fix problem and reset .
Machine Serial Number : ZF47B8GF7D00JHM
System Firmware Version : V3.00.01.10 JUN-19-2014 (M2022W)
Serial No. : CRUM-14121900958
thanks bro -
Hi,
One of the partner I'm mostly working with, brought his Officejet 8012e, facing a problem I'm failing finding a solution.
On the Officejet 8012e, there's only one USB connector on the back, for connecting the printer to a computer.
The screen displays the following message :
"a problem has occured with one of the printer's critical system files. A printer update will be installed to fix this problem"
But even if the printer is connected through wifi to the network, nothings happen, and the printer stays idle for days.
Have you ever...09-28-2023, 05:11 PM -
Hi all,
a friend gave me this printer because it's no longer working.
It powers on, but won't do a self-test print and when connected via USB to Windows, Device Manager says No Printer Attached under USB Hubs tree.
The red light doesn't blink either with no paper inside.
I think the firmware maybe corrupted. If someone has a similar printer and can provide a firmware dump, I really appreciate it.
Printer model: Panda PRJ-58U
Flash memory: Boyamicro BY25D16ASSIG
Comment