Ciao to all PSU stressed friends here. I've almost ZERO experience in repairing electronics but I decided to reweake an old iMac G5 1.8GHz bought on December 2004 after I saw blowed caps on the MB. I did replaced 20 caps
and the iMac was just fine! But after two days I couldn't resist and cleaned the keybord with some detergent
. Then, as I swicthed on the iMac, bad smeling and black screen. The PSU has no power except 5V, seems. LEDs on the MB behave like nr.1 is ON, nr.2 flashes (and 1 second light on the front panel), nr. 3 and 4 off. Do you think (maybe Toasty...
) I could try any checking/replacement to recover this problem? Please consider that I am a biologist...
Ciao, Sergio.




Comment