Announcement

Collapse
No announcement yet.

the gutless, bloated, and fried power supply hall of shame

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: the gutless, bloated, and fried power supply hall of shame

    Originally posted by c_hegge View Post
    Besides, that PSU's manufacturing date is 2004 (I can't remember the month, though). P4s were well and truly out by that point, and most Socket A boards had 12V connectors by that point too. 5V heavy designs really should have died off even earlier.
    Asus still used +5V for their socket 462 motherboards in 2004. (A7N8X family)
    ASRock B550 PG Velocita

    Ryzen 9 "Vermeer" 5900X

    32 GB G.Skill RipJaws V F4-3200C16D-32GVR

    Sapphire Nitro+ Radeon RX 6750 XT

    eVGA Supernova G3 750W

    Western Digital Black SN850 1TB NVMe SSD

    Alienware AW3423DWF OLED




    "¡Me encanta "Me Encanta o Enlistarlo con Hilary Farr!" -Mí mismo

    "There's nothing more unattractive than a chick smoking a cigarette" -Topcat

    "Today's lesson in pissivity comes in the form of a ziplock baggie full of GPU extension brackets & hardware that for the last ~3 years have been on my bench, always in my way, getting moved around constantly....and yesterday I found myself in need of them....and the bastards are now nowhere to be found! Motherfracker!!" -Topcat

    "did I see a chair fly? I think I did! Time for popcorn!" -ratdude747

    Comment


      Re: the gutless, bloated, and fried power supply hall of shame

      Originally posted by RJARRRPCGP View Post
      Asus still used +5V for their socket 462 motherboards in 2004. (A7N8X family)
      I know, hence the reason I said most and not all. I had an A7V600-X years ago, which had no ATX12V connector. The problem was that the main 20 pin ATX connector would get very hot and it eventually discoloured the 5V pins on the conenctor - evidently, the CPU was pulling too much from the 5V rail. Typical ASUS and their cheaped out peice of junk boards...
      I love putting bad caps and flat batteries in fire and watching them explode!!

      No wonder it doesn't work! You installed the jumper wires backwards

      Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

      Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

      Comment


        Winsis SKY-560 ATX

        So this thing came in a case. It's actually better than I thought it would be. Still really overrated. It uses TO-220 13009's, 6A bridge, "560uF" input caps. The transformer looks decent so it has potential. The 5V uses 30A schottky, 3.3V uses 20A schottky, and 12V uses a 20A ultra fast. There is a second spot for another rectifier at least. And....it needs one bad. I put this in a system with a Pentium D 950, and a Radeon HD 4670. With both at full load, the 12V dropped to 11.59V which made me think it was getting pushed to the max. However, at idle, the 12V only went up to 11.82V. It was pulling 265W AC from the wall when testing. All I've done so far was recap it. The fan was well oiled, and was quiet even after revving up. Not sure who the OEM is. Soldering looks good for such a low end unit though.

        Need to find some MOV's for it too and it'd be a nice little unit for a Core 2 and a low end video card

        Edit: Okay, I forgot to mention that I also replaced the non safety approved Y caps, and replaced those film caps with real X caps
        Attached Files
        Last edited by Pentium4; 01-07-2015, 10:47 PM.

        Comment


          Re: the gutless, bloated, and fried power supply hall of shame

          It looks alright - for a 300W

          You might want to fix up these few long component pins while you're at it too.
          Attached Files
          I love putting bad caps and flat batteries in fire and watching them explode!!

          No wonder it doesn't work! You installed the jumper wires backwards

          Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

          Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

          Comment


            Re: the gutless, bloated, and fried power supply hall of shame

            Yeah, after a rectifier upgrade.

            You might want to fix up these few long component pins while you're at it too.
            Already done, that was the "before" solder shot

            Comment


              Re: the gutless, bloated, and fried power supply hall of shame

              Okay, I upgraded the rectifier last night. I was gonna throw on two 30A schottky packs but decided one was enough for this PSU. I replaced the SFR20S20T ( ) with an MBR30H100CT ( https://cdn.badcaps-static.com/pdfs/...4735f13e3b.pdf ) and the 12V is so much stronger and more stable......with enough on the 5V.

              I stupidly tested it out with the new rectifier on a brand new Haswell system, which is probably 97% 12V based. Intel Core i5 4670, x4 DDR3 sticks, GTX 650, Intel 240GB SSD, DVD drive. Under a 125W AC load, the 12V was oscillating between 11.42V and 11.92V!

              When I put it in an older machine with more 5V, AMD quad core, x2 DDR3 sticks, HD 5450, x2 spinning hard drives, DVD drive. When pulling 120W AC doing the same test, the 12V only bounces between 12.08V and 12.16V. What a difference! It seems to be running more cool now thanks to the lower forward voltage loss of the shottky

              Comment


                Re: the gutless, bloated, and fried power supply hall of shame

                And this just goes to show you that you don't need a 500W+ power supply for a modern system with a high end CPU.

                Where did you buy those shottkies? Mouser, Digikey? Or free samples?
                I'd love to go to one of those manufacturers' factories and take a scoop of their reject high-power rectifiers. I'm sure at least half of them would be fine. Would be fun to upgrade my older PSUs that don't have a 4-pin 12V CPU connector.

                Comment


                  Re: the gutless, bloated, and fried power supply hall of shame

                  Originally posted by momaka View Post
                  And this just goes to show you that you don't need a 500W+ power supply for a modern system with a high end CPU.
                  That's right and I was wrong, it's actually a Phenom II x6 1035T.

                  Where did you buy those shottkies? Mouser, Digikey? Or free samples?
                  I got them from Digi-Key. Pretty good price too, I got 25 of these: http://www.digikey.com/product-detai...GOS-ND/1477174

                  I'd love to go to one of those manufacturers' factories and take a scoop of their reject high-power rectifiers. I'm sure at least half of them would be fine. Would be fun to upgrade my older PSUs that don't have a 4-pin 12V CPU connector.
                  Probably. That would be pretty neat. You mean to say that you have a bunch of AT power supplies?

                  Comment


                    Re: the gutless, bloated, and fried power supply hall of shame

                    I knew those fucking OSTs and Teapos are not to be trusted, even in those OEM Seasonics!
                    Attached Files
                    Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

                    Exclusive caps, meters and more!
                    Hardware Insights - power supply reviews and more!

                    Comment


                      Re: the gutless, bloated, and fried power supply hall of shame

                      Originally posted by Behemot View Post
                      I knew those fucking OSTs and Teapos are not to be trusted, even in those OEM Seasonics!
                      While they certainly can fail, the only cases where I've seen failed Teapos and OSTs in "good" (Seasonic, Hi-Pro, Delta, etc.) power supplies were in hot areas on high-hours units (generally pulls from corporate desktops that had been running 5 years 24/7).

                      Comment


                        Re: the gutless, bloated, and fried power supply hall of shame

                        I have no idea how long it was turned on but SB rail does run 24/7 in any case and it always is passive cooling only.
                        Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

                        Exclusive caps, meters and more!
                        Hardware Insights - power supply reviews and more!

                        Comment


                          Re: the gutless, bloated, and fried power supply hall of shame

                          Datecode of those transformers say that unit was made in the middle of 2007.
                          So it's about seven and a half years old - that's not that bad, is it?!

                          Comment


                            Re: the gutless, bloated, and fried power supply hall of shame

                            Datecode of the capacitors and board itself (2009/25) says 2nd half of 2009. They used 2 years old crapacitors, it was probably working less than 5 years.
                            Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

                            Exclusive caps, meters and more!
                            Hardware Insights - power supply reviews and more!

                            Comment


                              Re: the gutless, bloated, and fried power supply hall of shame

                              OST RLX are generally quite unreliable. RLS (black/gold, often found in PSUs) usually do better.
                              Also, are you sure that OST RLX was original to the PSU? The fact that it is 2 years newer and the fact that it is RLX makes me suspicious. Reason being is that RLX is uncommon in PSUs (they are close to specs to HM and are usually used in motherboards).

                              Comment


                                Re: the gutless, bloated, and fried power supply hall of shame

                                what do you know about RLP?

                                Comment


                                  Re: the gutless, bloated, and fried power supply hall of shame

                                  Only had one encounter in a Shuttle computer, and almost all of them were bulged - some even on non-stressful rails and away from heat sources. Just based on that, I would say no better than RLX. But I could be wrong of course - one experience is not enough to conclude, IMO.

                                  Comment


                                    Re: the gutless, bloated, and fried power supply hall of shame

                                    That RLX is indeed original. I think that the PSU was made in 09 and that the transformer is made earlier. The Seasonic built Antec Earthwatts PSUs always used OST RLX in that position. Interestingly, though, I've never seen that particular cap fail before. The only one I've seen fail on the EA-380 and EA-500 is a larger RLS on the 12V output.
                                    I love putting bad caps and flat batteries in fire and watching them explode!!

                                    No wonder it doesn't work! You installed the jumper wires backwards

                                    Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

                                    Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

                                    Comment


                                      Re: the gutless, bloated, and fried power supply hall of shame

                                      Yep, some parts were made earlier, the OST in question is 2007, the rest was 2009 ad assembled who knows when, I cannot read much from the label/serial number. It was ditched last year when the original computer was wrote off (partially because of problems with turning on), the guy who got the computer than for parts said he was not able to turn it on at all by the time he got it. That's when I got it for repair which was done this month.
                                      Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

                                      Exclusive caps, meters and more!
                                      Hardware Insights - power supply reviews and more!

                                      Comment


                                        Re: the gutless, bloated, and fried power supply hall of shame

                                        I think that actually is a 2007 board, it looks like a Japanese style date code on the PCB with the year hidden under that glue (2007/09/25). The ICs are also from 2007 (U101 is dated 0725).

                                        Comment


                                          Re: the gutless, bloated, and fried power supply hall of shame

                                          EMKO JS-300B HAZARDOUS AREA yeah baby around it when it's runnig

                                          It actually even has full input filter with genuine Y caps and varistors+thermistor! And the transformer is not too bad. And bridge rectifier RS405. Other than that, 470uF VIVA caps, 2SC4106 switchers (may be good too), SBL1040CT for +3,3 V, FG1004 for +12 V and SB1540 for +5 V. Oh yeah 30 A my ass

                                          Some of the secondary caps are bloated, every single cap biger than D6,3 on the AOpen motherboard it was powering was bad. And it was only with ceramic Athlon 1000 (Thunderbird) and Manli TNT2 M64. HDD has Spin retry count of 18 with big red FAILED, but runs just OK, possibly it was unable to start due to poor power from this unit.If I had nothing to do than I may renovate this, but it's waste of time with all those Fortron units I have here which are 10times better after recap.

                                          Note that small cap with K-shaped vent under the input connector. Yes, it is our beloved Rulycon
                                          Attached Files
                                          Last edited by Behemot; 03-09-2015, 12:04 PM.
                                          Less jewellery, more gold into electrotech industry! Half of the computer problems is caused by bad contacts

                                          Exclusive caps, meters and more!
                                          Hardware Insights - power supply reviews and more!

                                          Comment

                                          Working...
                                          X