SMPS low voltage

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Sojke
    Senior Member
    • Apr 2017
    • 131
    • Serbia
    #1

    SMPS low voltage

    I was repairing an SMPS that had failed. I managed to get it up and runing but t he main voltage rail is 1/3 less than what it is stated at around ~24.3V.

    I have marked the components I have replaced just in case with red dot, those with red and green have failed. All SMD components measure well.

    The amplifier also failed in this device, it is powered by the supply that now I have at low voltage. I have replaced amplifier hybrids and the same thing happens either way. With amp it is 22V with out it is 24V.

    I suspect LM3850 but I can not test it.


    Attached Files
    Tags: None
    • R_J
      Badcaps Legend
      • Jun 2012
      • 9516
      • Canada
      #2
      Re: SMPS low voltage

      What is your line a/c voltage? 230vac? I suspect the pfc boost circuit is not working.
      What is the PFC_VCC voltage? It should be around 16~18v. You could have a bad electrolytic on the pfc_vcc line, CE521, CE520, CE513.
      Also check the source resistors on the pfc mosfet's
      Last edited by R_J; 05-18-2020, 11:12 AM.

        Comment

        • Sojke
          Senior Member
          • Apr 2017
          • 131
          • Serbia
          #3
          Re: SMPS low voltage

          Spot on, VCC was 10.7V.
          Now there is +32V , but no sound from amplifier, all outputs are at 16V (both + and - side on all channels). Without TAS5538 outputs are at 350mV (Like in working one I had). I exchanged it 3 times with new ones from China and same thing every time.....

            Comment

            Previous template Next

            Related Topics

            Collapse
            • C152Heavy
              Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board
              by C152Heavy
              Samsung LN46C630K1F – Intermittent Backlight, BN44-00341B Power Board

              Summary for TL-DR readers:
              • Backlight is intermittent, may come on with TV boot or not. No flickering, never fails during TV on.
              • Have obtained Samsung schematic & service documents - Can upload if helpful.
              • Have read ALL applicable threads
              • C1818 and CP820 replaced as low hanging fruit
              • CN802 data taken for normal and failed BL operation. SUMMARY: Pin 2 - 5vDet = 3.52 @normal, 0.0 @BL fail. Pin 6 - EPWM = 1.631 @normal, 1.058 @BL fail.
              • VCC pin (18) of PFC...
              01-11-2023, 02:53 PM
            • ketone
              SMPS - Can they all handle wide range of Input Voltage?
              by ketone
              Hello Forum - See I got this SMPS Module!....its sourced from a US device and I'm in Australia.

              As we know Supply voltages in Australia 240v Versus 120V US.

              The Model of the SMPS is EAX39561401 and is used in LG and JVC DVD/VCR Player/Recorders...same model is used in both Australia and US...but perhaps they have differences??

              What's the chances I can use it in Australia - plugging it in to 240v instead of its origin country at 120v?

              Is it expected that most SMPS in such devices would handle between 100-240V by default?

              How can I...
              12-17-2022, 02:40 AM
            • Fernon@Repair
              Gigabyte Z490 Gaming X Motherboard No VCORE Voltage
              by Fernon@Repair
              i have Gigabyte Z490 Gaming X Motherboard .it has a power on no display fault .. no vcore voltage and debug led stuck CPU LED .

              VCCIO voltage ok
              VCCSA Voltage OK
              VCCPLL Voltage OK
              Ram Voltage ok
              RamVTT OK
              VPP 2.5 OK

              But No Core Voltage

              and i want to this vrm ic datasheet or pinout (ISL69269)
              anyone have this ic pinout voltages?...
              Yesterday, 07:19 AM
            • electron_jj
              Panasonic TH-L42D25A checking the PSU output voltage
              by electron_jj
              Hi Everyone, I am new to this forum. I have a Panasonic LED TV which doesnt turn on and is blinking 4 times repeatedly when I turn on the switch. The TV does not respond to the remote control so I had to turn on using the physical switch on the side of the TV. When I turn on the switch the 4 x blinking starts and repeat itself until I turn off the TV. There is a black screen. I turned off the light in the room to check the panel and I think there is no backlight as far as I can tell.

              I have been inspecting and testing the capacitors and diodes in the power supply board to try to...
              08-29-2021, 08:13 AM
            • sam_sam_sam
              Trip light 2400 watt line conditioner bought used issue with low voltage oscillation going on between relays
              by sam_sam_sam
              I found two capacitors on the board and one of the leads on one capacitor had bad soldering joint and the other joint connections not much better and there were several soldering joints that way to much flux around the joint redid several of them

              The capacitors were a non brand that I did not recognize they got replaced and now it does not oscillating between relay but what concerns me a little bit is when the voltage is a little bit low the output voltage is around 130 volts and then drops down to 115 volts this happens around 105 to 108 volts if remember correctly

              Now...
              06-09-2024, 10:57 AM
            • Loading...
            • No more items.
            Working...