question about "voltage divider?"

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tablet3rs
    Senior Member
    • Aug 2013
    • 57
    • philippines
    #1

    question about "voltage divider?"

    i was looking for this specific parts, its not available...
    BA33C18FP-E2-ND - Linear Voltage Regulator IC Positive Fixed 2 Output 3.3V, 1.8V 1A TO-252-5

    i have a question about voltage divider?

    i need 2 output in 1 input, 1.8v and 3.3v, i will used 5v input,

    [IMG][/IMG]

    will it work or not?

    will it be safe to use?

    thanks in advance...

    any comment will be much appreciated....
    Last edited by tablet3rs; 09-23-2016, 07:21 AM. Reason: correction
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 31051
      • Albion
      #2
      Re: question about "voltage divider?"

      no, a voltage divider is current dependant.
      use a pair of 1117's if you have to.

        Comment

        • tablet3rs
          Senior Member
          • Aug 2013
          • 57
          • philippines
          #3
          Re: question about "voltage divider?"

          Originally posted by stj
          no, a voltage divider is current dependant.
          use a pair of 1117's if you have to.
          thank you sir... appreciated

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Fernon@Repair
              Gigabyte Z490 Gaming X Motherboard No VCORE Voltage
              by Fernon@Repair
              i have Gigabyte Z490 Gaming X Motherboard .it has a power on no display fault .. no vcore voltage and debug led stuck CPU LED .

              VCCIO voltage ok
              VCCSA Voltage OK
              VCCPLL Voltage OK
              Ram Voltage ok
              RamVTT OK
              VPP 2.5 OK

              But No Core Voltage

              and i want to this vrm ic datasheet or pinout (ISL69269)
              anyone have this ic pinout voltages?...
              06-25-2025, 07:19 AM
            • electron_jj
              Panasonic TH-L42D25A checking the PSU output voltage
              by electron_jj
              Hi Everyone, I am new to this forum. I have a Panasonic LED TV which doesnt turn on and is blinking 4 times repeatedly when I turn on the switch. The TV does not respond to the remote control so I had to turn on using the physical switch on the side of the TV. When I turn on the switch the 4 x blinking starts and repeat itself until I turn off the TV. There is a black screen. I turned off the light in the room to check the panel and I think there is no backlight as far as I can tell.

              I have been inspecting and testing the capacitors and diodes in the power supply board to try to...
              08-29-2021, 08:13 AM
            • sam_sam_sam
              Trip light 2400 watt line conditioner bought used issue with low voltage oscillation going on between relays
              by sam_sam_sam
              I found two capacitors on the board and one of the leads on one capacitor had bad soldering joint and the other joint connections not much better and there were several soldering joints that way to much flux around the joint redid several of them

              The capacitors were a non brand that I did not recognize they got replaced and now it does not oscillating between relay but what concerns me a little bit is when the voltage is a little bit low the output voltage is around 130 volts and then drops down to 115 volts this happens around 105 to 108 volts if remember correctly

              Now...
              06-09-2024, 10:57 AM
            • Document Archive
              ISL95831HRTZ ISL95831HRTZ-T ISL95831IRTZ ISL95831IRTZ-T Voltage Regulator Datasheet
              by Document Archive
              3+1 Voltage Regulator for IMVP-7/VR12 CPUs

              Compliant with IMVP-7/VR12, the ISL95831 provides a complete solution for microprocessor and graphic processor
              core power supply. It provides two Voltage Regulators (VRs) with three integrated gate drivers. The first VR can be
              configured as 3-, 2- or 1-phase VR while the second output is 1- phase VR, providing maximum flexibility. The two VRs share the
              serial control bus to communicate with the CPU and achieve lower cost and smaller board area compared with the two chip approach.
              Based on Intersil's Robust Ripple Regulator...
              11-05-2024, 03:24 PM
            • kwyjibo
              Help understanding ACDET voltage divider A315-23
              by kwyjibo
              Greetings.

              Aspire A315-23 board (da0z8emb8c0 Rev c), no power.

              19VDC is at PQ3 pin 5. Nothing coming out, and started working around the power circuit.

              The ADP_ID pin (3) was pushed all the way inside the DJ jack (new one on order), causing it to not make contact with the barrel connector on the AC Adapter (nothing new), and where it wasn't my laptop I didn't just want to jump it to the DC Jack ground and call it a day.

              I can see the voltage divider circuit from PR71 and PR69 to PQ9. But some reason I cannot remember how if the DC...
              01-24-2023, 11:02 PM
            • Loading...
            • No more items.
            Working...