Enermax Liberty circuit layout

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • koste001
    New Member
    • Jun 2008
    • 1

    #1

    Enermax Liberty circuit layout

    Hi,

    Does anyone of you have a wiring diagram for a power supply Enermax liberty elt620awt. I see some photo's on this forum, all i need to know is the value of SMD R23 and the one next to that (R25?)
    A photo is also good.

    THX!

    Rene
  • Latoof
    Member
    • May 2008
    • 22
    • Australia

    #2
    Re: Enermax Liberty circuit layout

    I have this unit in pieces on my bench att. I cant see these resistors but then I am OLD so eyes not too good these days LOL Point me in the right directin and I'll do my best to either read the values or take a pic for ya
    E8400 8G Kingston PC6400 RAM
    GA-EP35-DS3R mobo
    HD4850 512M GA, 2x 1T WD SATA drives
    CoolerMaster case/Seasonic 850w PSU

    Comment

    • Latoof
      Member
      • May 2008
      • 22
      • Australia

      #3
      Re: Enermax Liberty circuit layout

      FOUND em...

      R23 is marked as 102 (1K) and R25 is marked as 7R5 (7.5 ohms)

      FWIW http://ezinearticles.com/?How-To-Rea...Code&id=491195
      Last edited by Latoof; 06-15-2008, 06:29 PM.
      E8400 8G Kingston PC6400 RAM
      GA-EP35-DS3R mobo
      HD4850 512M GA, 2x 1T WD SATA drives
      CoolerMaster case/Seasonic 850w PSU

      Comment

      Related Topics

      Collapse

      • klebendes_etwas
        Search for: QSC K10.2 Circuit Diagram & Component Layout Overview
        by klebendes_etwas
        Hello everyone! :-)

        An acquaintance of mine works as a DJ in his spare time and brought me a defective QSC active loudspeaker (Model: K10.2) for repair.

        Error description: The device could not be switched on (after he lent it to another DJ).

        A visual inspection revealed an obviously blown fuse (F41) and a cracked thermistor (R41) on the mains filter board. A closer look at the amplifier board revealed two defective power MOSFETS (Q13, Q14) and other defective components on the +12VLOW rail.
        After replacing all the obviously defective components, the...
        09-21-2024, 04:00 PM
      • klebendes_etwas
        Searched For: Intel DQ77KB - Circuit Diagram (And If Possible Also The Component Layout)
        by klebendes_etwas
        Hello everyone! :-)

        A friend of mine asked me if I could repair his parents' defective PC...
        Therefore, I need the circuit diagram (and if possible also the component layout) of an Intel DQ77KB mainboard.

        Can anyone help me with this, by any chance?
        Thanks in advance!

        So long​
        09-21-2024, 03:26 PM
      • momaka
        Enermax Liberty ECO 400W [ELT400AWT] - from scraped to serviced
        by momaka
        Remember this pile of junk electronics I got last year? Well, that's where this Enermax Liberty ECO 400 Watt PSU came from. Like I mentioned, it had cut cables and many bulged caps on the DC output side. I stripped a few cables and did a quick temporary recap with whatever junk (but still reading OK) caps I could find, then performed a basic power test – the PSU passed. Thus, I knew I'd eventually go around to repairing it. One year later and we're here.

        First shown is the label below, so anyone reading can see what PSU we're dealing with here.

        ...
        02-15-2021, 01:05 AM
      • Astonished
        Fixing the Charge Circuit of the Batteries of the DC Motor
        by Astonished
        Hi friends of electronics

        What you see in the video and pictures attached is the circuit for charging the batteries of a DC motor.

        The problem is that this circuit cannot charge the batteries (3 1800mAH NiMH batteries) any more. When the circuit was OK, its green LEDs lit up one at a time to show that the batteries have charged more. But now that the circuit is flawed, LEDs light up as you see in the video and at the same time successive beeps are heard.

        Please help me fix this circuit.

        (the datasheet of the IC: https://pdf.datasheet.live/28...
        01-28-2025, 06:24 AM
      • rddube
        Lenovo L490 Ram voltage circuit malfunction
        by rddube
        Hello friends,

        Looking for some guidance here. The RAM voltage circuit on this motherboard keeps burning out PU301 which is a RT8231AGQW. Copy of the board with the burnt chip attached with some voltage measurements and copy of the schematics also included.

        I think I've checked almost every component in the circuit, but when I change the RT8231, the laptop starts I have 1.2V on the inductor for about 10 seconds and then the RT8231 goes south and no more voltage on the inductor. All other voltages on the laptop are good, this is the only one conking out for a reason I...
        07-15-2025, 04:41 PM
      • Loading...
      • No more items.
      Working...