need suggestion on caps for dead AcBel/HP 5188-7520

bfordz

Senior Member

Join Date: Aug 2011

Posts: 81

Country: USA
#1

need suggestion on caps for dead AcBel/HP 5188-7520

01-16-2013, 10:26 AM

I got a "free", dead HP Pavilion Slimline Pc. The AcBel PC6012 / HP 5188-7520 PSU has 7 bloated caps and I want to replace them to see if this will get the PSU working for further diagnosis or just up and running.
It's got:
6 - Ltec 1000uf 10v LYZ 105c caps
1 - Ltec 1000uf 16v LYZ 105c cap

What should I replace these with? This will be my first PSU cap redo.

I looked at these but need some advise;
Panasonic eeu-fm1a102L - 10v (x6)
Panasonic eeu-fm1c102 - 16v (x1)
Attached Files
Tags: None
Khron

Badcaps Legend

Join Date: Sep 2006

Posts: 1350

Country: Finland
#2

01-16-2013, 10:44 AM

Re: need suggestion on caps for dead AcBel/HP 5188-7520

Those look like some good choices, actually

Just don't forget to change all the small(er) caps too, "just in case".

Khron's Cave - Electronics - Audio - Teardowns - Mods - Repairs - Projects - Music - Rants - Shenanigans
Comment
bfordz

Senior Member

Join Date: Aug 2011

Posts: 81

Country: USA
#3

01-16-2013, 02:05 PM

Re: need suggestion on caps for dead AcBel/HP 5188-7520

OK, thanks for the advise.
Comment

Previous template Next

Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!

by momaka

I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

https://www.badcaps.net/filedata/fetch?id=3591771

https://www.badcaps.net/filedata/fetch?id=3591772

It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

https://www.badcaps.net/filedata/fetch?id=359177...
- Channel: Troubleshooting Power Supplies and Power Supply Design
03-12-2025, 03:42 PM
HP Elitebook 845 G8 dead, only caps lock flashing 7 times. Charging light always on

by esqmooo

Hello everyone.

This is my development machine. I've been using it since two years and half without any problem except sometimes it wouldn't wake up from sleep.
Lately the issue became more frequent and powering it up would take few seconds to show the POST screen.
Then the computer refuses to power on at all. Now only the caps lock button flashes 7 times then stops. The charging light is always on whenever a power source is connected (battery or charger).
I tried long pressing on the power button, after several seconds it would go off then when the button is released...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
03-11-2025, 03:57 PM
Help with switching power supply caps

by captain150

I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
- Channel: General Capacitor Questions & Issues
03-16-2025, 07:34 PM
Gigabyte GA-6OXT :: caps question

by Foetuss

Good evening

I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

But I was also suprised about the bigger boys, which are 330µF 25V.
Could it be they used 25V caps because they were cheaper / available at that time?...
- Channel: General Capacitor Questions & Issues
02-11-2025, 12:22 PM
EVGA e-GeForce 7600 GS AGP 256MD2 [256-A8-N542-T2] with bad caps - fixed

by momaka

I did it again – I had to fulfill my inner desire to fix yet another old piece of hardware. This one is actually kind of worthwhile, too – it’s an EVGA e-GeForce 7600 GS AGP video card, model P/N: 256-A8-N542-T2. With the popularity of “retro” PCs from the Win9x to XP era going up, and the diminishing supply of decent AGP cards, it is expected their prices will go up. Or is it? I bought the this video card rather on the cheap side (~$9 USD shipped to my door), because the eBay seller listed it for parts or repair (and correctly noted the bad capacitors.)

So, here is the...
- Channel: Troubleshooting Desktop Motherboards, Graphics Cards, and PC Peripherals
06-06-2020, 04:39 PM
Loading...
No more items.

need suggestion on caps for dead AcBel/HP 5188-7520

need suggestion on caps for dead AcBel/HP 5188-7520

Comment

Comment

Related Topics