I just replaced two caps in an iMac G5 PSU - model 614-0325. I checked the open circuit voltages and they are not the same at standard ATX supplies. In particular, there is a +24 line which I didn't expect.
I found this site by Googling for 614-0325 pinout. There's a thread with that supply as the topic and it seems that 24V is an expected voltage.
Can anyone point me to where I can find more info on what voltages to expect on what pins and how to turn the PSU on without installing it in the comptuer? I'd like to check it out before putting the PSU back in.
Thanks,
I found this site by Googling for 614-0325 pinout. There's a thread with that supply as the topic and it seems that 24V is an expected voltage.
Can anyone point me to where I can find more info on what voltages to expect on what pins and how to turn the PSU on without installing it in the comptuer? I'd like to check it out before putting the PSU back in.
Thanks,
Comment