Oracle Micros DT Research Battery Charger ACC-001-33M

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • vpower
    Senior Member
    • Sep 2022
    • 111
    • italy

    #1

    Oracle Micros DT Research Battery Charger ACC-001-33M

    Hi,
    I have this charger, it's meant to recharge 4 batteries at a time. It has been probably connected to a 19vcharger instead of the correct 12v charger and it does not work anymore. I disassembled it and found a broken (shorted) diode (D22).
    So I replaced the broken diode with a similar diode pulled from the same board but it broke (very hot) even with correct 12v charger.
    Any hint? Maybe it's a standard circuit. Sorry I'm a noob.
    Thanks in advance
    Attached Files

Related Topics

Collapse

  • motormayhem
    Lenovo T460 Only Charges on One Charger
    by motormayhem
    Laptop Question
    Hello,
    I'm working on a Lenovo T460 that has been having trouble charging as of late. Its worked well since I've owned it for a few years. When I went to use it the other day it was dead and wouldn't turn on (was sitting on an Anker 65W GaN charger). After some fiddling with the charger I got it to turn on and start charging, but seemed like the charger was not working as it should (took a few plug and unplug cycles to get it to start charging).

    A day later it was dead again and wouldn't boot/charge no matter what I did. No lights or anything when...
    05-12-2023, 01:46 PM
  • Document Archive
    ISL88739AHRZ ISL88739 Laptop Battery Charger Datasheet
    by Document Archive
    The ISL88739 & ISL88739AHRZ are a highly versatile combo battery charger
    configurable for operating as either a Hybrid Power Boost (HPB)
    charger or a Narrow VDC (NVDC) charger, supporting 2-, 3-, or
    4-cell batteries. Both configurations allow the battery to work with
    the adapter together to supply the system load when it exceeds
    the adapter capability, referred to as system Turbo mode. HPB
    charger configuration reverse-boosts battery energy to the system
    bus to help the adapter provide the system power in Turbo mode.
    NVDC charger configuration...
    11-05-2024, 03:28 PM
  • Johndill
    Dell Inspiron 7567 LA-D993P odd charger issue
    by Johndill
    Hi, I have a Dell Inspiron 7567 LA-D993P that I've just got running.
    There was corrosion around PU1503 which shorted PC1518 & blew PL1504. (Reference pictures attached)
    I've replaced PC1518 & PL1504 & the laptop is now running however I now have another issue.

    Here are the tested scenarios:

    1. With the laptop running on battery, I plug in the 150W charger & the charger shuts off (no LED, protection mode) but the laptop remains running on battery.

    2. With the laptop off, plug in charger (LED says on) & the front charging...
    11-16-2022, 10:55 PM
  • exerion5000
    DELL Alienware 17 R3 (LA-C912P) only work with 120w charger in mode low CPU clock
    by exerion5000
    Hello, I received this laptop with the following condition: When I turn it on, it shows the ALIENWARE light and the Alien button lights up, then it does not show an image and it restarts constantly, as the customer had already informed me that the battery was dead, I connected an original charger that I had it for testing, the machine turned on normally and I was able to enter Windows without problems, after a while of testing I noticed that it is very slow (like a Cyrix 425...), and after performing a CPU test the frequency is
    below normal, as if it were operating in an extreme energy...
    10-15-2023, 02:12 PM
  • HERETIK10
    Adaptable charger voltage for Clevo D901C laptop
    by HERETIK10
    Hello everyone,
    Thanks in advance to anyone who takes the time to help me. Sorry for the quality of my English, I had to use a translator at times...

    I bought a functional Clevo D901C (Sager NP 92261) with its battery but without its power supply.
    So, I invested in a new LiteOn charger, advertised by an online seller as the right charger for my machine... BUT, according to the pinout (4pin + shell) of the charger, 1 and 2 are 20V / and 3 and 4 are grounded. When I measure pin 4 with the ground of the PC, I have 300kOhms, which seems to be confirmed by the electrical...
    11-08-2023, 04:24 PM
  • Loading...
  • No more items.
Working...