Lenovo Ideapad 3-15ALC6 LCFC HS461/HS561A/HS761 NM-D521
Collapse
X
Related Topics
Collapse
-
by Marc97hello there,, anyone who can help us to have bios for LENOVO
HS461 HS561 HS761 NM-D251 REV 2.0
I have downloaded bios from lenovo website,,, but it is .CAP FILE after my bios creator extract it...
i attached the .CAP may you can help us also to trim it.....-
Channel: BIOS Requests ONLY!
-
-
Hs461 hs561 hs761 nm-d521 rev 2.0 2020-12-11 bios plz
-
Channel: BIOS Requests ONLY!
-
-
by totofHello,
I have a Lenovo Ideapad 3-15ALC6 computer that I'm trying to repair.
Initially, the computer wouldn't start, and there was no power consumption from the charger. The board itself is reference HS261&HS561&HS761 NM-D521 rev 3.0, where you can find the schematic and board view here: https://www.badcaps.net/forum/troubl...-hs761-nm-d521
When I opened it, I noticed three burnt components near...10-26-2025, 10:27 AM -
by pc_okayHello friends,
I have this laptop AMD Platform starting & not posting, fan spinning.
When i press power button, the board get almost immediatly 0.5A ~ and board get stuck at 0.5A with power button led blinking indefinitly.
If i stop the computer (pressing 5s power button), board stop and when i restart i get approx 0.37A ~ and
I try to reflash the bios with no luck, same result, and i try disabling onboard ram (i remove resistors accordling schematic), no more progress.
CPU and his area heat, maybe the cpu is dead?
... -
by danny34Hello folks,
I have a Lenovo Ideapad V15 G2 with a Ryzen processor.
The owner damaged the motherboard with a knife while cleaning the ventilation slots on the bottom.
Pretty strange, but that's how it is.
I patched the 5 traces he cut.
The notebook now starts again, but does not produce any images. Neither via HDMI nor on the display.
But the display turns on, so it has its operating voltage and also 3.3V.
What signals does the display use to get the image? Unfortunately I have no experience with this.
Schematics:... - Loading...
- No more items.
Comment