Can anyone please upload Apple 820-00928-a Schematic ?
820-00928-a Schematic needed
Collapse
X
-
Re: 820-00928-a Schematic needed
Use 820-00281.OpenBoardView — https://github.com/OpenBoardView/OpenBoardView -
Re: 820-00928-a Schematic needed
820-00928-A schematics Here in the Attached file. I tried also brd files to upload but badcap admin may not have permission. plz rename 1mb pdf file as .brd.Last edited by fagoon bhuiyan; 06-23-2020, 03:08 PM.Comment
-
-
Re: 820-00928-a Schematic needed
Here you are the boardview file...Attached FilesComment
-
Re: 820-00928-a Schematic needed
Maybe the Layout and Diagrams are useful :bersuka cita:
Comment
-
Re: 820-00928-a Schematic needed
Dear fagoon bhuiyan Thank you for your support & Help
God bless youComment
-
Comment
-
Re: 820-00928-a Schematic needed
just wanted to drop a quick thanks to Fagoon for the files........saved ma bacon mate. Thank YouComment
-
-
Re: 820-00928-a Schematic needed
Thx for the files @Fagoon bhuiyanMy YouTube channel - https://www.youtube.com/channel/UCiD...5d6OgizDqoi_SAComment
-
Re: 820-00928-a Schematic needed
Thanks for the files but 820-00928-A is different than the boardview posted here.
You can check here https://logi.wiki/index.php/MacBook_..._composite.jpg
in the upper right corner, there is an extra capacitor next to c4912.
The specific extra capacitor is shorted on mine.Comment
Related Topics
Collapse
-
by ThetechdudeHi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.
I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.
Thanks.-
Channel: Schematics and Boardviews
07-15-2025, 11:15 AM -
-
Apple iPhone 8 Plus Schematic & BoardView
820-00846
Apple iPhone 8+...-
Channel: Schematics and Boardviews
-
-
by a_p3rsonHi there,
I'm looking for anyone who might have information on Apple's embedded Apple Watch charging daughterboard, ID 820-02601. This is currently used by Anker in their Apple Watch charging products, but likely by other Apple partner brands as well.
You can see the board referenced in ChargerLab's teardown of the Anker Y1811 3-in-1 MagSafe cube - they discuss the "Apple Watch wireless charging circuit" about 2/3rds down the page. It's not pictured, but the board ID reads 820-02601-A, which sure sounds like Apple.
This daughterboard uses an interesting...-
Channel: Schematic Requests ONLY!
04-21-2025, 11:41 PM -
-
820-1688 820-1688-A PowerBook G4 System Board (Motherboard) Board View & Schematic
820-1536 DC-IN Board Schematic
820-1733 Audio Jack Microphone Board Schematic...-
Channel: Schematics and Boardviews
10-01-2024, 04:12 AM -
-
by knk2729dag3bembcd0 rev d Board view and Schematic needed for Non Graphic Conversion (DIS to UMA) as the Graphic chip is bad
-
Channel: Schematics and Boardviews
-
- Loading...
- No more items.
Comment