MSI Gaming laptop MS-16gh1 need schematic - distorted sound
MSI MS-16gh1 need schematic - distorted sound
Collapse
X
-
Tags: None
-
-
Re: MSI MS-16gh1 need schematic - distorted sound
SchematicComment
-
Comment
-
Re: MSI MS-16gh1 need schematic - distorted sound
Here it is I posted my first Thread:
https://www.badcaps.net/forum/showth...73#post1068573
Comment
Related Topics
Collapse
-
by LEECH666Good day ladies and gentleman!
I am currently trying to repair a Grundig Vision 9 37 9880 T USB LCD TV for a friend that has a weird audio problem. Basically everything works fine except for the heavily distorted sound when the Subwoofer module is connected and there is a buzzing sound coming from the PSU PCB.
This seems to be a rather rare TV so there is not much prior on topic help to be found however a service manual is available at the usual sources (Electro Tanya i.e.).
I think the PSU buzzing comes from one of the coils near the bridge rectifier but... -
by maleksaMy Yamaha MOX8 synthesizer recently developed two issues.
Firstly, after booting up, it operates as normal. However, after about 5 minutes, the sound starts to get distorted (broken up screeching sound) almost like putting it through a guitar distortion pedal. After a while, the distorted sounds will go away for a while and comes back. At times, the synthesizer will also freeze I need to power off and on again.
Secondly, when powering off and on again, there will be times where the synthesizer will freeze during the boot sequence (freezes at the MOX8 Opening Screen),...-
Channel: Troubleshooting Audio Equipment
11-07-2024, 03:28 AM -
-
so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!!
what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!
i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...-
Channel: General Computer & Tech Discussion
-
-
by televizoraHello.
I have an issue with HP 8470p - rather strange one.
I have a noise and sound distortions on both internal speakers and external speakers, when I plug such into the 3.5mm audio jack.
Seems like the noise is present especially when I play audio, where there are parts/sections where the volume of the actual recorded sound is low.
Interestingly, when I play the windows sound test, everything seems to be almost okay. The sound/distortions are similar to when you have interference from some other piece of equipment nearby or when you have an audio receiver with bad amplifier...12-31-2021, 10:25 AM -
by HillybillyHi I've been trying to test for a fault on a pcb code 40-S351OA-PWB1G and ha ving tested a certain component with multimeter and atlas dca55 which came up with faulty component also the multimeter set to a diode mode couldn't get a reading.on board i'ts zd501,could anyone tell me if this component would make the pcb drop 42v which supplies to amp side of philips HTS3530/05 sound system please.A schematic with codes for parts would be much appreciated.Thanks
-
Channel: Troubleshooting Audio Equipment
07-24-2023, 08:13 AM -
- Loading...
- No more items.
Comment