Needed for board repair.
Anyone Have 820-00850 schematic?
Collapse
X
-
Re: Anyone Have 820-00850 schematic?
It looked like ***********s.com had it, but they charge for them. If you were doing this professionally that might be worth it, but it looks to be about 35$?Last edited by SMDFlea; 10-16-2019, 02:05 AM.
“Men always seem to think about their
past before they die, as though they were
frantically searching for proof that they
truly lived.”
– Jet (Cowboy Bebop) -Comment
-
Comment
-
Re: Anyone Have 820-00850 schematic?
Bump, if someone got a hold of it and can share it, it would be deeply appreciated.OpenBoardView — https://github.com/OpenBoardView/OpenBoardViewComment
-
Re: Anyone Have 820-00850 schematic?
You can found it here it's just For $6:
https://www.r***********/threads/mac...oardview.3079/Comment
-
Re: Anyone Have 820-00850 schematic?
here you go
doesn't appear to be accurate when looking at the board though.Last edited by reverendalc; 07-02-2019, 09:21 PM.This isn't Monaco... This is BaghdadComment
-
Related Topics
Collapse
-
-
by re-atariHello all,
Does anybody have a schematic and/or boardview of the Gigabyte GA-H110-D3A mainboard available? It would really help me out big time...
This board was donated to me in a known non-working state. In its previous life it was used as a mining board, so I suspected bad caps and a relatively easy fix. My intention is to use the fixed board as a testbed for a Truenas or Unraid build. The previous owner told me that the mainboard started to act 'weirdly' after replacing the originally installed Celeron for an i5-6400, varying from starting up irregularly to not at...-
Channel: BIOS & Schematic Requests!
-
-
by camisaoHello,
I need your help finding the MSI GF63 12UDX (Board MS-16R81 VER_2.0) schematic.
I accidently inserted MSI USB a programmer that was connected to a board that has Neutral tied to GND, instead of connecting it to the USB-ISO that was on another port (Friday afternoon mistakes....).
Now it doesn't start. 😏
I've looked for burned parts but found none.
The 20V from the adapter are ok and the battery has 12V if I disconnect the battery plug.
I need the schematic to try to understand where there the problem may be or if it is repairable.
Thanks!...-
Channel: Schematic Requests ONLY!
-
-
by Gau_sahaSir ,
I need the schematic of h61m-s rev1.1 gigabyte motherboard.
Recently this board came to me for repair but could not find its schematic .
The problem of this board is no display but the board has a power on it .Processor is not heating .
For preliminary investigation i changed vga cable ,ram and processor but the same issue persist.
Whenever i switch on the motherboard monitor says NO SIGNAL .
The board is almost new .No sign of corrosion on the board seen .
...-
Channel: BIOS & Schematic Requests!
-
-
by c_vasiloiuIt seems that the 16GB eMMC has some problems and I would like to install a bigger hard drive, a regular 2.5" SATA SSD drive. On a similar laptop schematic (Quanta ZM8 r1A) It looks that the CPU Celeron 2955U has some SATA ports available that may have some test points on the motherboard.
Can somebody help with the schematic and to confirm if a SATA SSD drive can work with wires connected on these test points? Also a SATA SSD drive can work with +3.3V taken from the motherboard?-
Channel: Schematic Requests ONLY!
09-07-2024, 04:21 PM -
- Loading...
- No more items.
Comment