La-e541p

[mferna14]

Re: La-e541p

Another know how.. I remove PQ712, I get all the voltage on the Gate of PQ740 which is 24.5V a true voltage out here meaning ISL88739HRZ is working fine, but as soon I solder PQ712 the voltages drop again. PQ712 is not short & I also checked PQ707 (Protection) all seem to be fine. Do you think I should replace PQ712??? I also check PQ705 & PQ305 (Charging MOSFETs) & the surrounding caps., all seem to be fine. I removed the resistor PR913 to check if any short further but still the same. So there is something going on before this resistor. How come voltage is dropping???

[SMDFlea]

Re: La-e541p

Another know how.. I remove PQ712, I get all the voltage on the Gate of PQ740 which is 24.5V a true voltage out here meaning ISL88739HRZ is working fine, but as soon I solder PQ712 the voltages drop again. PQ712 is not short & I also checked PQ707 (Protection) all seem to be fine. Do you think I should replace PQ712??? I also check PQ705 & PQ305 (Charging MOSFETs) & the surrounding caps., all seem to be fine. I removed the resistor PR913 to check if any short further but still the same. So there is something going on before this resistor. How come voltage is dropping???

This is the schematic requests section. If you want help start a new thread in the main forum, as always .

[Adiktus]

Re: La-e541p

Here are the schematics for la-e541p

Greate help man thx

[doktorkomputer]

Re: La-e541p

Thx

[alterr333]

Re: La-e541p

Here are the schematics for la-e541p

Thank you mate!!

Big CHEERS!!!

[naseee]

boardview

[Rickkap]

Thank you

[almirsilvestre]

Re: La-e541p

Here are the schematics for la-e541p

Thank you very much...may God bless you eternally and may you have much wisdom.

[almirsilvestre]

boardview

Tahnk you so much...May God continue to bless you and give you much kindness and wisdom

[alterr333]

Re: La-e541p

Here are the schematics for la-e541p

THANK YOU BROTHER! Deserve a big jarof beer!