pegatron h36fd rev:2.1 schematic required
Dear friends
pegatron h36fd rev:2.1schematic
I need this schematic..Please share..
pegatron h36fd rev:2.1schematic
I need this schematic..Please share..
-
-
Re: pegatron h36fd rev:2.1 schematic required
Where are you expert friends ? -
Re: pegatron h36fd rev:2.1 schematic required
pegatron h36fd rev:2.1schematicLast edited by SMDFlea; 10-12-2021, 10:57 AM.Comment
-
Re: pegatron h36fd rev:2.1 schematic required
The schematic isn`t available .A bios has already been posted in the "Bios Requests ONLY!" section - https://www.badcaps.net/forum/showthread.php?t=71651Last edited by SMDFlea; 10-12-2021, 10:58 AM.Comment
-
Hi All,
Need a bit of assistance digging up some information on current technology support required for modern motherboards to post? By modern let's say 6th gen skylake to current intel and all of the Ryzen series. You would think this would be on the ARK product page, but nope. Besides saying dedicated graphics required it doesn't really tell you squat.
Reason I ask is I've ran into this a few times now (first on 6th gen SkyLake and now on 12th gen AlderLake) where if I use an intel F SKU CPU multiple different boards refuse to post with multiple different graphics... -
HikVision DS-7104HQHI-K1 Motherboard: DS-80303_P REV 2.0 and SN: C47579229 Firmware dump or unlock required. Thank you!...06-11-2025, 01:54 PM -
Hi all,
First time trying to fix a TV for a friend, it's a Bush DLED32165HD.
Power Board - 17IPS11
Mainboard - 17MBS82S
Panel - VES315WNDB-02
Red blinking standby light is on steady, press power button on remote and light flashes 7 times then stays steady, press power on remote again light flashes 10 times and then goes off.
Checked all the voltages on the power board inc backlight circuit, they all read ok and are stable. Backlights tested with backlight tester and all work fine (2 strips x11LED on each).
No picture, backlight or sound just blinking... -
Hi Master's Help Required HP Pavilion DV2 Laptop
PCB : P/N:HPMH-41-AB3700-D00G
PWA : P/N:HPMH-40GAB3700-D
REV : D06-04-2025, 08:22 AM -
Hello!
i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.
Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
...04-12-2025, 10:38 AM
Comment