Please find me Dell 5400 Boardview
-
My laptop died on me about two years ago. I went through the basic recovery steps a few times and eventually, after plugging the battery back in for the xth time, a capacitor blew up on the board. Weirdly enough, the laptop then booted (battery removed) and has been running without issue ever since.
I'd eventually like to examine the board in detail however I've had zero luck searching for schematics/boardviews for my particular motherboard.
Any help would be greatly appreciated.
Specs:
MOTHERBOARD: HELA15_N18E_80W (P/N: VF32T 0VF32T CN-0VF32T)... -
Dell latitude 5490
DDM70 LA-F401P
Schematics, BoardView... -
Hello,
this is my first post at Badcaps and in general i am new to fixing electronics. I am looking forward to learn a bit more about diagnosing and repairing :-)
What I have around is a DELL OPTIPLEX 3060 Micro (USFF), which is not powering on, even not showing any signs of life (No amber / white LED).
I got a original 65W DELL PSU / Power brick (PA-12 / 074VT4) which hopefull should be the correct one. I could get another DELL PSU with the Partnumber 0G6J41 with the same 4.9mm DC Jack connector as the one I already have, but I dont think that would help (maybe... -
Hi there masters, recently i got a dell 5400 chromebook and wanted to install windows, i searched the internet and i found out other people also wanting a UEFI bios for this model, i searched there is a R/W legacy, but there are bugs like keyboard/trackpad not working, and hard to install.
so i decided to try to port one, this bios is based on dell 5400 windows version, i am testing this bios for a week now an found only a little to no bug at all in windows 10, or only a minor issue
in windows 11 sound driver compatibility, but overall its ok, for me i can deal with it, 😅😅😅... -
Unfortunately have an issue with the main power switch which I have traced the issue down to the motherboard! I know it's a long shot as motherboard manuals from Dell are hard to come by. I can turn it on using the bios options when mains power is applied to the PC after the mains power has been removed for a while.
The only markings on the motherboard are CN-0TP406 and underneath 316764300010 LF-PCB; PWA-SAN MARINO/MB_A01,12
However I would like to make it fully operational, with the power turned onto the unit from the front power switch. The wiring is fine, it looks like I am...
Comment