Quanta DA0P5HMB8F1 rev. F

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • supermattch
    New Member
    • Sep 2025
    • 6
    • usa
    #1

    Quanta DA0P5HMB8F1 rev. F

    Hello,

    I need the schematic and boardview for the Quanta DA0P5HMB8F1 revision F. The laptop is a HP 15dy-2021nr. I keep finding similar boardviews but not this particular one. The components are in different places than those similar ones. Thank you.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • lpraderi
      Need help with HP15-fxxxxx Quanta U99/U92 LVDS <> eDP conversion.
      by lpraderi
      Hello , for some time I was studying Quanta U9x/8x schematics and the option to use both type of screen (LVDS 40 pin / eDP 30 pin).
      In some cases to use LVDS screen PCB use converter IC RTD2132/6
      Now I found an HP 15 F series U99 mainboard with RTD chip not populated and LVDS 40 pin lcd touch screen
      at the same time I have another HP 15 N series with Quanta U92 mainboard and RTD2136 with eDP 30 pin lcd screen (no touch).
      Maybe someone more experienced in the subject can clarify if is posible to change type of screen used with some resistors / bios options change.
      ...
      11-25-2023, 09:31 AM
    • supermattch
      HP 15dy-2021nr wont power on mystery volts
      by supermattch
      Hi everyone.

      I am diagnosing my personal laptop, because it wont power on and no leds light up.

      At the dc-in there are 8 pins, 1 and 2 shows healthy 19.66 volts. The next three are ground, but the 6th one shows .283 volts. This is strange to me, it should be 3.3 or 5 or aome volts not 0.283v. As I am new to this, I would like some guidance. Please someone advise me on what to check next.

      Oh the boardview and schematics I am using is for a similar model as I cannot find the proper one anywhere. Quanta DA0P5HMB8F1 rev F. Nowhere on the internet.
      09-23-2025, 12:13 PM
    • Francisco.s
      Quanta N76 power-on issue.
      by Francisco.s
      Hello, I'm trying to repair an HP 27 Quanta N76 (DA0N76MB6E0 Rev E).

      I only get 3.3V, 5V, and 1.05V; no other voltages.

      I tried the BIOS and changed the KBC. The KBC self-programmed upon power-up after changing it.

      The VR-On is missing for NCP81220, but 1.2V is also missing for DDR4, so 1P2V_PWRGD is low. SUSON or DDR_VTT_EN are not present on the DDR4 voltage regulator (RT8231BGQW). It seems the KBC isn't triggering these signals.

      I'm using the Quanta N91 schematic, but there are too many changes that make it nearly impossible to measure signal...
      07-14-2025, 02:20 PM
    • ruletero
      DA0P5HMB8F1 Turn on, no video, consumes only 22 mA
      by ruletero
      Hi everyone

      Model: DA0P5HMB8F1, Rev F

      Please your help with this mobo, DA0P5HMB8F1, it turns on but no video appear and consumes only 22 mA, no suson signal, EC and PCH bios updated, no success.

      It responds to power button and try to bring up without success and next it restart with the same cycle, it just restarts all the time, no schematic available, I'm using OP5D schematic, below my measurements on KBC

      ​

      Any idea what I have to review?

      thank you...
      01-14-2025, 06:27 PM
    • Maxmad
      HP Omen 17t-ck100 Quanta G3LB DAG3LBMBCD0 schematic
      by Maxmad
      Anyone has schematic for this laptop board? HP Omen 17-ck1000 Quanta G3LB DAG3LBMBCD0...
      10-19-2025, 03:00 PM
    • Loading...
    • No more items.
    Working...