Announcement

Collapse
No announcement yet.

HP notebook G62 - 451EL need update file

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    HP notebook G62 - 451EL need update file

    Hi, my first bios request.. i need for HP G62 451EL , MA.BO= DAAX1JMB8C0 REV.C the original bios update file / archive from HP.. thanks.. if none i can evaluate tested bios dump..
    THANKS!
    Tags: None
    #2
    Re: HP notebook G62 - 451EL need update file

    Here you go. Second archive is BIOS update from HP website along with trimmed version to be flashed directly to BIOS chip by programmer.
    Attached Files
    Originally posted by PeteS in CA
    Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
    A working TV? How boring!

    Comment

      #3
      Re: HP notebook G62 - 451EL need update file

      Thanks, but i see G62 454ef instead of G62 451el..

      Comment

        #4
        Re: HP notebook G62 - 451EL need update file

        Leave it alone or edit model name with nbdmifit after flash. Is the BIOS model name such a critical issue for your client?

        I used to upgrade these to HD6370 instead of HD5470 GPU when they came in with dead chips. Never had a single issue, no BIOS editing required. In fact I never knew there ever was a model with a HD6370 GPU from the factory, apparently yours has that.
        Last edited by Th3_uN1Qu3; 11-18-2022, 05:54 AM.
        Originally posted by PeteS in CA
        Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
        A working TV? How boring!

        Comment

          #5
          Re: HP notebook G62 - 451EL need update file

          Update: probably i need no more the bios.. pc is booting, i forgot to connect a ram, now the real goal is how to test it without a harddisk, my old puppy linux usb key don't totally load, i made a new updated puppy key but it doesnt boot even on desktop pc.. diskpart says the usb drive is not bootable, diskpart refuses to set it to be bootable, with the command "attributes disk set boot disk".

          Comment

          Previous template Next
          Working...
          X