Hello guys I have a problem with my DELL G15 5511
Plate number GDL85 LA-K455P
TS/ 51LMHK3
When the computer turns on, the red, yellow, and green lights come on Help please
Dell G15 5511 (GDL58 LA-K455P)
Collapse
X
-
Hello please fix my file
DELL G15-5511
Plate number GDL85 LA-K455P
ST/51LMHK3
The problem is that it turns on and there is no screenAttached FilesLeave a comment:
-
Attached FilesLeave a comment:
-
GDL58 LA-K455P REV 1
BIOS RECUVERY ERROR
NEED WORKING BIOS
ST: 5NKKPH3Attached FilesLeave a comment:
-
-
la-k455p rev:1.0
st :st5jsrph3
mec1515-nb
need ec bios and how to enable jtag for programme mec1515-nbAttached FilesLeave a comment:
-
MODEL = Dell G15 5511
BIOSAttached FilesLeave a comment:
-
post the S/T,the full name and model of the laptop,post the original content of the bios chip,etc..Leave a comment:
-
la-k455p this board was i/o short mec 1515-nb i changed with same i/o from other board( la-k034p) board is power on 400ma i think i will program this i/o but i dont have ec file can someone give me fileLeave a comment:
-
Hello
My bios doesn't show up and the fan is loud
Please help me fix it
service tag: HDSX7K3
Dell G15 5511,La-k4551p
ThankAttached FilesLeave a comment:
-
hi please repair my backup file
Problem: 3 white 6 orange and white, red, green, display
S/tag: 1VVHNQ3
LA-K455PAttached FilesLeave a comment:
-
Attached FilesLeave a comment:
-
hi please help with my dell G15 5511
can you please clear me
ST: HKN7RM3
its so very slow/lag on windows
thanks in advanceAttached FilesLeave a comment:
-
Service Tag: 3R9P0H3
Attached FilesLeave a comment:
-
anyone please help i have tried other bios from this post laptop gives white red green colour every times it is powered on
Leave a comment:
-
dell g15 motherboard part no la-k455p rev 1.0
service tag 3R9P0H3 gives dell logo and restartsAttached FilesLeave a comment:
Related Topics
Collapse
-
by zeniusHello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...-
Channel: BIOS Requests ONLY!
-
-
by mikeybassHi, I hope some one has some advice for me. I searched the forums but didn't see anything relevant. I acquired two identical Dell 9010 Mid Tower computers from a business office upgrade (they were going to throw them out). Both of them have the same motherboard (00F82W). One of them works flawlessly. The other one had a corrupted BIOS. I tried flashing numerous main BIOS and EC files from the internet, but none of them worked. I decided to copy the main BIOS and EC from the working 9010 computer and successfully flashed the corrupted BIOS. This got the computer able to boot again and run norm...
-
Channel: General Computer & Tech Discussion
04-23-2025, 04:30 PM -
-
by gizahaDell latitude 5580, motherboard cdp 80 la-e151p
3 amber 3 white blinks. Dell website sais it's problem "bios recovery" and suggested solution "recovery image not found"
(from here https://www.dell.com/support/manuals...e7a&lang=en-us)
I try plugging charger while pressing ctrl+esc, machine turns on, nothing and after 20 seconds it gives 3 amber 3 white blinks again.
Since ssd is replaced and had clean install windows, i've... -
by mrrubikHi folks,
I got a Dell Optiplex 7010 micro PC (Exact Model) with 8FC8 BIOS and locked out admin password. I attempted to remove the password by patching the BIOS via info from this thread: https://www.badcaps.net/forum/troubl...ssword-patcher
After flashing the patched the BIOS, the PC is unresponsive with a solid AMBER power LED (not documented in manual anywhere)
Steps I took:- Read BIOS with CH341a, verified hash twice
- Patched
-
Channel: BIOS & Schematic Requests!
-
by bmxlovahHi,
My Dell Precision T7910 died after enabling onboard SAS controller and applying RAID settings. There were no hardware changes between working and not working state, only setup (via bios -> controller settings). After applying settings and reboot PC turns on, flash leds (normally) but there's no further action, it just stays on with no graphics and no keyboard led's on. There's no Dell logo, nothing. I've tried resetting bios by jumper, replacing cpu's, replacing ram, removed/replaced cmos battery, disconnecting all drives etc. I've also dumped .bins from mobo chips SLI1 (16...-
Channel: BIOS & Schematic Requests!
-
- Loading...
- No more items.
Leave a comment: