Hello friends, someone could help me, I managed to remove the password of this computer with rcunlocker with the 16mb chip, but I got the end point security message.
Announcement
Collapse
No announcement yet.
Hp Elitebook 830 G7 end point mesaje after unlock rcunlocker 16mb
Collapse
X
-
Re: Hp Elitebook 830 G7 end point mesaje after unlock rcunlocker 16mb
Post your EC + BIOS file here.
----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.
----------------------------------------------------------------------------------------------------------------------------------------------------------
-
Re: Hp Elitebook 830 G7 end point mesaje after unlock rcunlocker 16mb
you should have reset security to factory settings at 1st boot.----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests
all donations are welcome,
see the donate button at the bottom of the page, or
>>>>> click on this link to donate via PayPal. <<<<<
Every donation made will go towards server fees and maintenance costs.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Comment
-
Re: Hp Elitebook 830 G7 end point mesaje after unlock rcunlocker 16mb
Originally posted by hoaca388 View PostPost your EC + BIOS file here.
Comment
-
hello everyone, i also removed the password from my 830 G7 , only flashing the first bios chip but i got the end controller security problem.
take
i am not that geek guy "Clear your VSS region in main bios and re-enter DMI in bios. That should fix the issue." is this supposed to take out the second chip and flash it, edit it and than weld it again on the mainboard or can i just use some options in the bios ?
Comment
Comment