Lenovo Ideadpad gaming 3 15ACH6

[peste]

Can someone help me, I have a black screen, it generates the post but I have no image, all the voltages are normal, my recorder corrupted the original file, I need the file corrected please.

GOG21 LA-K971P
REV: 1A
2021-03-31

SN: PE0A9NQR
MTM: 82MJS00100

you have everything you need at post #83...GOG20305A

[Alexinho FPS]

Can someone help me, I have a black screen, it generates the post but I have no image, all the voltages are normal, my recorder corrupted the original file, I need the file corrected please.

GOG21 LA-K971P
REV: 1A
2021-03-31

SN: PE0A9NQR
MTM: 82MJS00100

[Michalski124]

Another thing forgot to ask - i dont have any soldered gpu ram (someone desoldered before), without it should it post something on screen?

[SMDFlea]

Should I copy my S/N and how do I do that if required? Is it required to just boot laptop without copying anything to test?

You can try them without the serial, it can be added later.

[SMDFlea]

you have everything you need at post #83...
https://www.badcaps.net/forum/troubl...3-15ach6/page5

The laptop has four bios versions...the laptop's bios is corrupted and the bios version cannot be found...try the versions from post 83 one by one...

The DMI offsets don`t look right (for the 82k2) ,i think they should be

EA5000 - EA6FFF

EAA000 - EAA03F

[Michalski124]

Should I copy my S/N and how do I do that if required? Is it required to just boot laptop without copying anything to test?

[peste]

Hello i need BIOS, i Think someone before me broke that and tried do something with flashing (soldering of chip) and now laptop only spins fans and LCD is light up but nothing on the screen. All voltages are ok, battery is chargin.
s/n mp2e39rk
board la-k971p v1
laptop Lenovo ideapad gaming 3 15ach6 82k2 with 5600h and rtx 3060
bios dump Done with ch341 with 1.8v adapter

you have everything you need at post #83...
https://www.badcaps.net/forum/troubl...3-15ach6/page5

The laptop has four bios versions...the laptop's bios is corrupted and the bios version cannot be found...try the versions from post 83 one by one...

[SMDFlea]

thread merged.

[Michalski124]

Hello i need BIOS, i Think someone before me broke that and tried do something with flashing (soldering of chip) and now laptop only spins fans and LCD is light up but nothing on the screen. All voltages are ok, battery is chargin.
s/n mp2e39rk
board la-k971p v1
laptop Lenovo ideapad gaming 3 15ach6 82k2 with 5600h and rtx 3060
bios dump Done with ch341 with 1.8v adapter

[TOMÁŠ]

None taken, we are here to help each other I think.
My oppinion is that replacement accoring to my comparison link and your bios datasheet W25Q128JWSIQ is better for your replacement because its maximum Maximum Clock Frequency is up to 133Mhz and your GD25LR128D is up to 120Mhz
(w25q128fwsig is only 104 Mhz) but someone correct me if I wrong.

Thank you very much, all works as should.

[TOMÁŠ]

None taken, we are here to help each other I think.
My oppinion is that replacement accoring to my comparison link and your bios datasheet W25Q128JWSIQ is better for your replacement because its maximum Maximum Clock Frequency is up to 133Mhz and your GD25LR128D is up to 120Mhz
(w25q128fwsig is only 104 Mhz) but someone correct me if I wrong.

Thank you very much. Will update end of next week.

[questore]

No disrespect, but I'm sure everything with my programmer CH341A and drivers is working fine. I'm still able to read other chips without any issues. That's why I'm asking for alternatives to GD25LR128DSIG.

None taken, we are here to help each other I think.
My oppinion is that replacement accoring to my comparison link and your bios datasheet W25Q128JWSIQ is better for your replacement because its maximum Maximum Clock Frequency is up to 133Mhz and your GD25LR128D is up to 120Mhz
(w25q128fwsig is only 104 Mhz) but someone correct me if I wrong.

[TOMÁŠ]

CH341A supports this chip with Neoprogrammer. I have used it before.
If you cannot detect chip with the program then either your driver is not correctly installed on your machine or the legs not tuching, OR chip is faulty.
Try reinstalling the driver first and check leg connection with multimeter

No disrespect, but I'm sure everything with my programmer CH341A and drivers is working fine. I'm still able to read other chips without any issues. That's why I'm asking for alternatives to GD25LR128DSIG.

[questore]

Thank you for your reply. I'm using Neoprogrammer, and the original chip I was reading as GD25LQ128C. The new chip doesn't work at all—it's not responding. I'm connecting it via a 1.8V adapter and holding it on a clipboard; I also soldered but not reading.

CH341A supports this chip with Neoprogrammer. I have used it before.
If you cannot detect chip with the program then either your driver is not correctly installed on your machine or the legs not tuching, OR chip is faulty.
Try reinstalling the driver first and check leg connection with multimeter

[TOMÁŠ]

Thread merged. Your programmer is a CH341A, what software are you using with it. The chip is probably ok, it`s just that the programmer can`t detect it if the chip is not in the supported list. You can try to write to it if you choose W25Q128FW

Thank you for your reply. I'm using Neoprogrammer, and the original chip I was reading as GD25LQ128C. The new chip doesn't work at all—it's not responding. I'm connecting it via a 1.8V adapter and holding it on a clipboard; I also soldered but not reading.

[SMDFlea]

Hi, I mentioned my laptop earlier—it's a long story. The BIOS chip (GD25LR128DSIG) has a broken pin. I ordered a replacement from China, but it seems to be fake, as the programmer doesn't detect the chip at all. My question is: what is its equivalent? I don't want to order another one just to find out it doesn't work again. I checked the W25Q128JWSIQ and W25Q128FW, but I'm not sure if they're compatible. Please help. Thank you for your time and response.

Thread merged. Your programmer is a CH341A, what software are you using with it. The chip is probably ok, it`s just that the programmer can`t detect it if the chip is not in the supported list. You can try to write to it if you choose W25Q128FW

[TOMÁŠ]

Hi, I mentioned my laptop earlier—it's a long story. The BIOS chip (GD25LR128DSIG) has a broken pin. I ordered a replacement from China, but it seems to be fake, as the programmer doesn't detect the chip at all. My question is: what is its equivalent? I don't want to order another one just to find out it doesn't work again. I checked the W25Q128JWSIQ and W25Q128FW, but I'm not sure if they're compatible. Please help. Thank you for your time and response.

[Ghost18_07]

HE DIDN'T WORK BRO,PLEASE NEED HELP

Sorry for not posting the S/N , i didn't notice that.

S/N: MP23G6AP

[SMDFlea]

RULES UPDATE for BIOS requests/offers AVOID BANNING, READ BEFORE POSTING
https://www.badcaps.net/forum/troubl...before-posting

You MUST:

• Provide the full machine model number, serial number (or Service tag, SNID) and the board model number (see https://www.badcaps.net/forum/showthread.php?t=88758 ) ,The serial number, make, full model number, motherboard model and revision (except QR codes) must be written/typed at your request as per the rules. Not as a picture, part of the file name and so on.

[Ghost18_07]

HE DIDN'T WORK BRO,PLEASE NEED HELP