Announcement

Collapse
No announcement yet.

User Profile

Collapse

Profile Sidebar

Collapse
Avatar
barby16_06
Member
Last Activity: Today, 02:04 PM
Joined: 07-25-2014
Location: romania
  •  
  • Filter
  • Time
  • Show
  • Source
Clear All
new posts

  • All the laptops are the same (because of a project). All have 8mb +16mb ICs. Allready tryed a USB bios recovery. I worked with some UEFITool a few years ago just to extract a main bios from an Instable update bios from manufacture, and with Hex editor just to compare dumps....
    See more | Go to post

    Leave a comment:


  • Greetings to all,
    I got arround 100 pieces of Dell latitude 3510 at my work, and in last week they started fall with bios. I dumped both 8mb and 16mb bins from a working one and flashed them on the bricked ones but i can't get away from manufacturing mode. Even if i'm trying to set it up manually in bios, it won't store the ST.
    It is possible to delete the ST from both bins, and at the first boot to manually store it in BIOS manually?
    It would be great to not asking for 100 bins here.
    If not, maybe you can give me one solution to do this myselft.
    i'll post here...
    See more | Go to post

    Leave a comment:


  • I allready checked these.
    it's not something related with hardware.
    I tryed with a lot of amd drivers, with some, randomly i got a very blurry image on a half of screen (with fn6-turning onn/off display working), and with no external image, but on next reboot the problem is back - only hdmi output and intern display completly blank.
    ​I still believe that Is something related with ec firmware....
    See more | Go to post

    Leave a comment:


  • s/n: Nxa84ex00d11212e797600
    snid: 11207743376
    model no: N18q13...
    See more | Go to post

    Leave a comment:


  • Greetings all,
    I need bios+EC for Acer A515-45-R15B (AMD RYZEN 7 5700U, AMD GRAPHICS)
    MB is DAZAURMB8C0 REV C.
    Problem: No intern display image, HDMI port work on external display.
    i tryed allready with different bios, including rollback with crisis with stock bios 1.05 but nothing.
    Even tryed to change settings from advanced bios, or replaced AMD drivers after cleanning them with amd cleanup utility or ddu.
    GPUZ- dosn't recognise bios of GPU in windows.
    I allready checked LVDS cable and tryed with a different modulle of RAM and still nothing on intern...
    See more | Go to post

    Leave a comment:


  • Re: Eeprom dump thread!



    is not good. now led is not blinking even.
    just stay on directly. no light, no boot

    And led bar is verified. Psu is good


    100% problem is from nand firmware, some bad blocks....
    See more | Go to post

    Leave a comment:


  • Re: Eeprom dump thread!

    hi to all.
    i have a problem with my wellington tv

    Model: WL24HD279SW
    SN: 8122254 800200
    MB: 17MB110S
    PSU: 17IPS61-5
    PANEL: V236BJ1-P01 REV CB

    I tried all the core updates on usb but no luck.
    when i plug usb in tv end press ok and plug tv led start bllink fast for 3 seconds and then nothing happens.

    I need full software to rewrite on tv.

    Also mention that i have also rt809h and tryed different dumps on 2mb memory. but again no luck. now is original spi dump 2 mb.
    ...
    See more | Go to post

    Leave a comment:


  • Re: how to remove protection of led on sharp lc32le600e

    also the service manual...
    See more | Go to post

    Leave a comment:


  • Re: how to remove protection of led on sharp lc32le600e

    all leds are good
    i say that i disasembling the pannel and checked all leds.
    power board is RUNTKA619WJQZ
    in a few hours i will upload photos with all boards

    with pannel taked of and power on the tv in service mode all leds are working fine
    See more | Go to post

    Leave a comment:


  • Re: how to remove protection of led on sharp lc32le600e

    it's 1b
    error from led acording to troubleshoting manual from sharp
    See more | Go to post

    Leave a comment:


  • Re: how to remove protection of led on sharp lc32le600e

    i made the update allready to latest version.
    with official version from sharp site
    See more | Go to post

    Leave a comment:


  • how to remove protection of led on sharp lc32le600e

    hi.
    need some help
    i have a sharp lc32le600e that it's shut down by itself after 5 seconds
    i try to reset error in service menu by following vol- + input buttons to enter to service menu, then press vol- + ch - and try both error reset and factory init.
    in both cases tv open normal for abaout 5 second and then it's shutting down with red led flash.
    i open the display and check all 8 bars with leds and they are all good
    if i lett tv in service mode stay on until i shut it down from ac plug, but can't be used becouse it remain a letter K on screen.
    ...
    See more | Go to post

  • barby16_06
    replied to Acer e1-570 core i3 bios
    Re: Acer e1-570 core i3

    hi. can you please upload the bios file? thanks
    See more | Go to post

    Leave a comment:


  • Re: DA0HK5MB6F0 REF R version B MBX-269 bios please.

    sony vaio SVE151G17M DA0HK5MB6F0 REV:F MBX-269 bıos please

    original working dump with r0170d5 version
    and wish dump for r0180d5 version
    link for selft installing r0180d5 version [url]http://www.sony.ro/support/ro/content/cnt-dwnl/prd-comp/EP0000295580_8579/SVE1513C1E[/url]

    and workink dump [ATTACH]142096[/ATTACH]


    i wish dump for r0180d5 because i can't update from os, laptop is restarting but no update is made, and when i make changes in curent bios at first...
    See more | Go to post

    Leave a comment:


  • Re: DA0HK5MB6F0 REF R version B MBX-269 bios please.

    hi all.
    i need a dump bios for my laptop sony sve1512e6ew
    i try allready others dumps from search field but none work 100% how it should be
    only one show waio logo after about 3-4 minutes and goes further
    i cant go inside bios, keyboard is not recognised, usb keyboard not seen, usb flash drive is seen but i can't navigate on hyrens menu to enter mini xp and make a bios update from vaio bios flasher.
    hdd is formated and can't install a new os

    mb is DA0HK5MB6F0 REF F MBX-269
    proc...
    See more | Go to post

    Leave a comment:


  • bios dump working for lenovo yoga pro 2

    working dump bios for lenovo yoga pro 2
    [url]http://www.megafileupload.com/76kv/bios_LENOVO_YOGA_2_PRO.bin[/url]https://working dump bios for lenovo..._PRO.bin[/url]
    See more | Go to post

  • need key combination to enter bios update on asus x551mav

    hi all. i have an asus x551mav with bios failure. it's power on when i push power button but no image, no post, no sound, nothing.
    bios chip is w25q64fw - with 1.8v power and my ch341a have 3.3 power
    the only way to flash bios is to enter in bios update from keyboard but i don't know key combination. i know that on acer it was fn+ esc, and on some asus is whas ctrl+home and power buton, but at this model of asus i didn't get in update mode.
    if anybody know how to enter in update menu please help me.
    thanks.
    See more | Go to post

  • Re: Asus t100ta (transformer )dump bios needed

    solved. it was from board of battery. it was faulty. i change the board and them laptop starts. bios was good.
    See more | Go to post

    Leave a comment:


  • Asus t100ta (transformer )dump bios needed

    hi all. i need an dump bios for an asus t100ta (transformer) .
    original bios is: [url]http://dlcdnet.asus.com/pub/ASUS/nb/T100TA/T100TAAS313.zip[/url]

    but i need dump file of 8mb (8192) and original file have 4098 ~ 4mb
    my laptop dosn't see the battery level, is it full charged but i can power on laptop because it is recognised discharged. i try with another battery but same thing. the only think that could be is corrupt bios.
    i have an programer for w25q64 but i don't find dump file anywhere,

    please somebody help me.hi all. i need an dump bios
    See more | Go to post

  • Re: Urgent help needed locating LED fuse on Toshiba L750

    Hy. i have same problem with my toshiba l750 - dablbdmb8e0
    only that my laptop have more problems if i can say.
    i have no backlight on display and if i touch lvds or aproach finger to lvds_vadj wire at the lvds connector from mbu backlight come on but image is white with straped lines, then if i press a litle on the bottom side of display it comes the image with no other problems, if i remove pressure on display or from the wire at lvds connector form mbu problems returns.
    i measured tensions at lvds connector...
    See more | Go to post

    Leave a comment:

No activity results to display
Show More
Working...
X