the original is damaged. I was told in another forum that the board will not start without programming the EC first. I have a bios file but i'm not sure if the EC bin is attached. HELP!
-
Last edited by SMDFlea; 09-19-2022, 11:49 AM. -
Re: Need EC.bin for la-g881p
the service tag is GN1P3Z2Comment
-
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Mọi khoản quyên góp cho badcaps đều được hoan nghênh, hãy nhấp vào liên kết này để quyên góp. Cảm ơn tất cả những người ủng hộ----------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
need Clear ME on la-g881p bios dump
Can someone clean my bios image for me. I can't find the correct firmware repository to do it myself. thanksComment
-
Re: need Clear ME on la-g881p bios dump
ME firmware repository https://mega.nz/folder/PJFXnCDK#lWSX5W0ODubZ2pf3gu3unw
(a note about ME 16 ,not relevent to this thread, all ME 16 firmware is hosted seperately at win-raid at the moment,not sure if it will be added to the other mega shares)
ME System Tools https://mega.nz/folder/qdVAyDSB#FLCPaDVIsPYiy2TAUjD7RQComment
-
Re: Need Bios + EC.bin for la-g881p
the hard drive won't detect after clearing the ME. what am i doing wrong?Comment
-
Re: Need Bios + EC.bin for la-g881p
do you have for alienware DDQ70 LA-G881P REV:2.0
IS THIS unit work even without battery,,,
2 charger use,,,
my unit as per client said after removing battery goes no power,,,
no shorted parts,, i think there is sensor,, or unit need batteryComment
-
Master password OF BCKRZW2Comment
-
Common SPI bios chip programming Questions and Answers
----------------------------------------------------------
Q: I have a bios request,i can`t post my backup as i can`t read from the chip.
A: If you can`t read from it how do you expect to write to it ?.
Q: Why is my bios chip unreadable ?.
A: The programmer is faulty or has a worn or broken zif socket.
The USB cable is frayed,connector pins worn or some other physical damage.
Not enough amperage or voltage to power the programmer properly.
Bad...09-02-2021, 04:40 PM -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
First of all thanks to all of our members who have posted previously all methods posted here.
Please leave a comment if you find something new,or have anything else to add.
-----------------------------------------------------------------------------------------
Find by serial number,model number or series
If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
Operating system and OS version.If... -
Hi, my laptop wont boot at all
With original bios no POST, only LED lights
With alternative BIOS from model TP500LN (flashed via programmer) the notebook works again
Some issues
A- with bios from 500LN, it won't update from bios of model 500LA (from 500LN v203 to 500LA v300)
B- If updated from 500LN version 203 to 300, the battery stops being recognized
Things I tried
1- Update / clear ME: Took the non working bios, made a backup, and did this: https://www.badcaps.net/forum/troubl...theory/trouble... -
Hello, I have an old Dell G3 3579 (ST: 2WQ7LP2-8FC8) with a newer 8FC8 BIOS password. I have successfully attached to the flash chip (W25Q128JVSQ) on the motherboard with a CH341A programmer and made several modifications using Intel FIT (e.g., allow software SPI write) without bricking. I was also able to boot to a modified GRUB shell where I attempted to edit many BIOS security related options like BIOS Guard/Lock, Flash Signature Override, ME FW Image Re-Flash, etc.
Unfortunately, some of these modifications like to Intel BIOS Guard failed because it is fused into the PCH. Also,...
Comment