help please to unlock a lenovo p1 g3
i try with lenovo autopatcher
help please
i try with lenovo autopatcher
help please
-
This specification for the LENOVO ThinkCentre M920 + ThinkCentre Tiny-in-One (TIO) 24 Gen3 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ThinkCentre M920 + ThinkCentre Tiny-in-One (TIO) 24 Gen3 boardview and ThinkCentre M920 + ThinkCentre Tiny-in-One (TIO) 24 Gen3 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly...09-12-2024, 01:58 PM
-
This sums up discussion related to Lenovo P14s Gen5 in this thread. Credits go to Sbaro and especially Maxpower3. The locked dump is attached.
The device is based on NM-F871 motherboard with Nuvoton NPCK397 series controller. The motherboard also contains three BIOS chips: two different Winbond chips for main BIOS and external EC flash, and also a Gigadevice chip which purpose I do not know. The password information is contained directly in controller and thus can be manipulated by reprogramming it, so reprogramming BIOS chips is technically not required, however you may wish to make... -
I read the bios from the motherboard 2 times and did a compare. both files seem to be identical. The autopatcher doesn't recognize the .bin.... -
Hi everyone, I hope I'm in the right place!?
and sorry for my english!
I have ThinkPad P1 Gen3/X1 Extreme Gen3
I still have 2 months of On-Site Warranty!
initially our IT department
he had set a Supervisor password that blocked only part of the BIOS settings.
Supervisor password = PeP11
it always worked
After a recommended update, (he thinks gone bad at this point)
Performed via Soft Lenovo Vantage
("BIOS Update (Utility & Bootable CD) for Windows 11, 10 (64-bit),
Linux - ThinkPad P1 Gen... -
Hello to all
i have a lenovo m70q gen 2 , i need to unlock hiden advanced menus to configure tdp ( i'am using currently an i7 10700 ( non T ) and need to customize PL1 and PL2 )
can someone please help me ?
best regards...07-11-2025, 05:03 AM
Comment