Please i need dump for laptop i3
motherboard c18-vd1
main : W25q32
ec : W25x40
motherboard c18-vd1
main : W25q32
ec : W25x40
-
-
-
Re: Need DUMP (MAIN+EC) FOR motherboard C18-VD1
LAPTOP Ultrabook condor
modele sidus ut14
serial number not mentioned
thanksAttached FilesComment
-
-
Re: Need DUMP (MAIN+EC) FOR motherboard C18-VD1
t45 c18-vd1 dumps
in can't download (vinafix)Last edited by aboumohamed; 06-22-2022, 11:46 AM.Comment
-
Re: Need DUMP (MAIN+EC) FOR motherboard C18-VD1
good dump for motherboard c18-vd1Comment
-
Hello,
I have a Asus ROG Strix Scar 15 (G533QM) that had a dead motherboard (Graphics card dead) and after trying to fix the motherboard with no success, I bit the bullet on a sale for a new motherboard. I ordered a motherboard for the 15 inch model which is the one that I have, and when the motherboard arrived it wasn't for a little while that I saw it was from the 17 inch model.
My question is, can I update the Bios on this G733 motherboard to a G533 Bios.
The reason for wanting to do this is that the keyboard isn't working as it should, and I think this... -
Hello,
Have you tried reading out the nor on the main motherboard with the APU ??? it has 256mb and is u1014 on apu motherboard ?
Is it possible to swap the main motherboard with the apu? -
Hi everyone 😀,
I'm here today to ask for help with repairing the motherboard of a Lenovo Legion Y540 17IRH.
To give you some context, I'm passionate about computer repair so much so that I've invested in a lot of tools and started practicing on dead and old hardware. I've been learning how to solder and desolder components, mostly focusing on phone repairs.
Recently, I bought a broken Lenovo Legion Y540 17IRH for just €150, and there are two main reasons why I made this purchase:- I already own the exact same model, but its plastic chassis is badly damaged.
-
Subject is a blank screen issue in HP Envy 17-3290NR 3D version laptop with motherboard Louis V1.1 6050A2489901 MB-A02. Production year is 2012. This one is a 2nd hand motherboard which I could use it for few months only. Suddenly no output from the internal display and also no signal from HDMI port then Windows out of order after few boots.
Caps lock working normally and no HP's caps-lock warning blinks. Making a hard reset and replacing the RAM sticks or using different slots didn't help.
Fans are spinning. Blindly could install windows11 and got the device manager... -
Here’s another motherboard that needed a full recap: an ASUS P5GC-MX.
This one was gifted to me some years ago by user Pentium 4, along with a few other goodies. It actually came in working order with no bulging or leaking caps. However, I noted there were United Chemicon KZG caps everywhere on the motherboard. The CPU VRM output (CPU V_core) was the only exception: it had only 2x KZG. The rest was 6x UCC TMV 4V 680 uF caps… which aren’t any good news either.
So here is what the motherboard looked like with its original caps:
CPU VRM area up close…...
Comment