GWTN141-10BL help clean the region, and which version of Intel ME System Tools you need to use, I did not find. Thanks
-
-
Re: Please clean ME region on Gateway, dump added
Open the bios with MEAnalyzer and you'll find out.
Everything is described in detail in this topic.----------------------------------------------------------------------------------------------------------------------------------------------------------
All donations to Badcaps are welcome.
Become a Badcaps supporter
>>>>> click on this link to donate <<<<<
Thanks to all supporters.​
----------------------------------------------------------------------------------------------------------------------------------------------------------Doctrina est fructus dulcis, radicis amarae.. -
Re: Please clean ME region on Gateway GWTN141-10BL, dump added
Thank for help, studying.Comment
-
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
Hello guys,
could I please get some help cleaning the ME region of the attached Zbook 17 G1 bios dump (CH341a, neoprogrammer, chip-desoldered, dumped twice, identical checksum)?
Symptoms, delayed BIOS post (ca. 45 secs.) keyboard not working, touchpad not working, booting linux live, console says "Management engine not configured".
I tried following the ME firmware cleaning guide, but whatever Flash Image Tool version I try, I get the same error:
Error 10: Failed to open with processed commands.
Unable to open file: C:\Users\Elitebook... -
Hello friends, i need a Gateway NV79 Bios dump with Motherboard label LA-5881P REV 1.0, somebody can share it please... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
hello everybody,
i have a problem with the bios dump that i found it here also in the forum.
the dump is working fine but with a delay 15-20 sec... to get a display after turning on the notebook.
the other problem is that im bios :
mac address (internal lan) not applicable.
can someone please clean the region and also take a look whats the problem with the mac address?
wifi is working also fine......
Comment