svod3 ic not responding

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ddhlawi
    Senior Member
    • Feb 2017
    • 165
    • algerian

    #1

    svod3 ic not responding

    hi I have svod3 nor read spi 25 and any ic
    Attached Files

Related Topics

Collapse

  • vbogoev
    Lenovo S6000 won't turn on. Data recovery needed.
    by vbogoev
    Hello,

    Here I have the mentioned tablet with motherboard s6000-mb-h401. The tablet won't turn on, no display, charging normally. I manage to connect to UART port and got this output when I try to start it:

    Code:
    [PWRAP] pwrap_init_preloader
    [PWRAP] pwrap_init
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=0 rdata=5AA5
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=1 rdata=5AA5
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=2 rdata=5AA5
    [PWRAP] _pwrap_init_sidly [Read Test] pass,SIDLY=3 rdata=5AA5
    [PMIC_WRAP]wrap_init pass,the return
    ...
    06-20-2023, 06:36 AM
  • chth96
    LG GCC-4521B cannot read any disk
    by chth96
    I bought 6 second hands odd $5 at a flea market and I found that 2 odd(GCC-4521B,TS-H192) won't read any disk.
    But I measured all ESR value of SMD capacitor which is located on the TS-H192's PCB and replaced two capacitor which has higher ESR value.
    And To My joy,this TS-H192 odd finally recognized burned CD as well as pressed CD.😂
    But there was no more good fortune for GCC-4521B..In order to dead GCC-4521B back to life, I replaced three capacitor which has higher ESR value and I rubbed silicon grease on the every glides.I even brushed lens with cotton swab which was soaked...
    02-13-2024, 07:31 AM
  • triplefour
    Karavision PRO KP-8800 wont read burned DVD.
    by triplefour
    a friend of mine brought me a Karaoke Machine that was somehow damaged in shipping and will no longer read the Burned DVD that was in it when it was shipped. they swear up and down that it used to read that DVD just fine. The drive was making all kinds of horrible noises and wouldn't read any discs when i started working on it. after cleaning the lens and adjusting the spindle it will read regular CDS now but still wont read any burned CDS or DVDS or even regular DVDs. is this the proper place to ask about this?
    cause its a video karaoke machine... not strictly "audio equipment"...
    02-19-2023, 06:29 PM
  • someonenotyou
    Dell Vostro 3501 - no signs of life after BIOS read
    by someonenotyou
    Hi.

    I have a laptop Dell Vostro 3501 which did not POST. When connected to power supply and turn it on, the keyboard backlight would turn on but nothing else. Sometimes there was 1 BEEP code indicating problems with BIOS.

    Then I disassembled it to read the BIOS chips. It had 2 - 64mbit and 128mbit. I connected CH341A (with 3.3v mod) to both of the chips (still soldered on main board) and read them.

    After I reassembled laptop back and tried to turn it on. Now there is no sign of life. Not even keyboard backlight.

    Then I took the motherboard out...
    01-27-2025, 05:15 AM
  • mgjini
    Help- Lenovo l13 yoga 10th gen how to read nuvoton npce68bpa
    by mgjini
    Hello all I don't know if I am on the right section, I am trying to read bios from this laptop lenovo l13 yoga I think is 10 or 11th gen, lar-2 mb 9837-1

    I have used this program before and I have read bios from lenovo x390 but this board I can not seems to read it, I am using 32 pins and choosing lbb-2 256 jenk

    I have included some pictures here, I have paid version of verytanov which also works with sas programmer as I have tested and read bios before, motherboard is on when asked to be on, pins 1 on motherboard making connection with the reading board as it beeps...
    12-04-2022, 12:08 PM
  • Loading...
  • No more items.
Working...