HP EliteBook x360 830 G7 bios password

[solomost]

Send to you

not working bi have black screen caps lock blinking 7 time + fan not spining . what s the probleme

[hoaca388]

not working bi have black screen caps lock blinking 7 time + fan not spining . what s the probleme

Double check to see if you accidentally moved the very small components around the bios chip.

[solomost]

Double check to see if you accidentally moved the very small components around the bios chip.

I checked it, nothing changed. I found out that the BIOS SHIP is damaged. I replaced it with another one and programmed it with the original file. It didn't work either (caps lock hold on) . I think I lost everything.
Can you repair the original file? thank you for help master

[eriko45]

i have hp elitebook x360 830 g7 with no display fan just spins at maximum speed,someone to clean the bios for me.
SN:5CG04544Y3
PRODUCT ID:2X8U2PA#ABG
BOARD NUMBER:6050A3142001-MB-A01(A1)
THANK YOU IN ADVANCE.

[eriko45]

hi try and feedback

can you please post this bios file i want to use it,am trying to open but it keeps saying invalid file.Thank you

[shiyab]

can you please post this bios file i want to use it,am trying to open but it keeps saying invalid file.Thank you

HI try

[eriko45]

HI try

i tried but it didnt work,the file is unconfigured when run through the MEANALYSER.

can you please clean this one for me, https://www.badcaps.net/forum/troubl...04#post3703504

the fan spins at max speed and no display,

SN:5CG04544Y3
PRODUCT ID:2X8U2PA#ABG
BOARD NUMBER:6050A3142001-MB-A01(A1)
THANK YOU IN ADVANCE

[teokarafou]

HELLO I HAVE BLACK SCREEN AND F5 AND F8 ORANGE LIGHT,HERE IS THE BIOS DUMP,IF SOMEONE CAN HELP WITH A CLEAN AND WORKING BIOS
HP ELITEBOOK X360 830 G7
SN: 5CG0473033
PRODID: 177F8EA#AB7
BOARD NUMBER:6050A3142001-MB-A01(A1)

[Blaze Tech]

HELLO I HAVE BLACK SCREEN AND F5 AND F8 ORANGE LIGHT,HERE IS THE BIOS DUMP,IF SOMEONE CAN HELP WITH A CLEAN AND WORKING BIOS
HP ELITEBOOK X360 830 G7
SN: 5CG0473033
PRODID: 177F8EA#AB7
BOARD NUMBER:6050A3142001-MB-A01(A1)

try

[teokarafou]

try

DIDNT WORK

[jonico2007]

May I request to unlock bios
HP EliteBook x360 830 G7
SN# : 5CG1019MXT
ProdID: 1D0E6UT#ABA
Build Id : 20WWOLBT601#SABA#DABA
Feature byte : 3X476J6S6b7B7H7MR7W7maBapaqauawb8bVbhcAdUdpdqfAfPguhKhkjhkmE.Q2

[SMDFlea]

May I request to unlock bios
HP EliteBook x360 830 G7
SN# : 5CG1019MXT
ProdID: 1D0E6UT#ABA
Build Id : 20WWOLBT601#SABA#DABA
Feature byte : 3X476J6S6b7B7H7MR7W7maBapaqauawb8bVbhcAdUdpdqfAfPguhKhkjhkmE.Q2

Patch the 16MB EC_Bios with RCUnlocker - https://www.badcaps.net/forum/troubl...23#post1622423

[jonico2007]

Patch the 16MB EC_Bios with RCUnlocker - https://www.badcaps.net/forum/troubl...23#post1622423

I already tried this. I also tried to factory reset the bios settings. It shows no bios password but when I tried to install the operating system, can't skip the sign in option with microsoft aggreement. It seems that need to sign in on previous service.

[koshin]

May I request to unlock bios
HP EliteBook x360 830 G7
SN# : 5CG1019MXT
ProdID: 1D0E6UT#ABA
Build Id : 20WWOLBT601#SABA#DABA
Feature byte : 3X476J6S6b7B7H7MR7W7maBapaqauawb8bVbhcAdUdpdqfAfPguhKhkjhkmE.Q2

Try this.

[Scottyvr1]

I have a Elitebook 830 G7 that has the bios locked, I removed the motherboard and the Bios chip (Winbond 25Q128JVPQ) I soldered the chip on my CH341A and read the data, I followed a youtube tutorial to remove the password by replacing lines of code with FF to remove the password etc, I then reinstalled the chip but now get HP Endpoint Security Controller Problem as well as the bios password is still there. I have obviously done some thing wrong.
I have now removed the chip again read the data and dropped it into RC Unlocker which has generated an unlocked Bin file. Could somebody please take a look at this file and see if they can see why I am getting the HP Endpoint error.
Thanks in advance

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[Scottyvr1]

file attached

[Scottyvr1]

SN#5CG1033RNM
CAMELLIA-6050A3136201-MB-A01(A1)
PRODUCT ID 113X7ET#ABU

I have tried running the script in tiny hexer to fix the endpoint error but it doesn't work. I get line 3, error 65: Cannot open file"C:\ENDPOINT\endpoint.bin"

[peste]

SN#5CG1033RNM
CAMELLIA-6050A3136201-MB-A01(A1)
PRODUCT ID 113X7ET#ABU

I have tried running the script in tiny hexer to fix the endpoint error but it doesn't work. I get line 3, error 65: Cannot open file"C:\ENDPOINT\endpoint.bin"

try this..
https://www.badcaps.net/forum/troubl...er#post3310855

[Scottyvr1]

try this..
https://www.badcaps.net/forum/troubl...er#post3310855

Thanks very much for your help, I will give it a try when I take out the main board again.