hello friends
i have a dell 7400 which has 8mb and 16 mb bios chip which has a display problem
motherboard model is 7400 EDC40 LA-G871P
service tag 9C6Q5Y2
please help me regarding this bios and which chip should i program
hello friends
i have a dell 7400 which has 8mb and 16 mb bios chip which has a display problem
motherboard model is 7400 EDC40 LA-G871P
service tag 9C6Q5Y2
please help me regarding this bios and which chip should i program
post the contents of both bios chips..
Due to a lack of donations, server free space at a critical level, and possible closure of Bios Requests all donations are welcome, click:
Hi,
Anyone help me remove password from this Dump of Dell Latitude 7400?
My laptop is Non-VPro Version.
SERVICE TAG : GJ832R2
ASSET TAG : G00878
system number : GJ832R2 - 8FC8
Hi,
Anyone help me remove password from this Dump of Dell Latitude 7400?
My laptop is Non-VPro Version.
SERVICE TAG : GJ832R2
ASSET TAG : G00878
system number : GJ832R2 - 8FC8
Hi,
Anyone help me remove password from this Dump of Dell Latitude 7400?
My laptop is Non-VPro Version.
SERVICE TAG : GJ832R2
ASSET TAG : G00878
system number : GJ832R2 - 8FC8
SMDFlea Thank you for guiding me.
I will use the 8FC8 patcher next time.
I have a Dell Latitude 7400 motherboard (LA-G871P) with two Winbond 25Q80DVSIG chips labeled UT2 and UT6. I accidentally erased the contents of the UT6 chip while attempting to diagnose an issue. However, I suspect that neither of these chips actually contains the main BIOS.
Could someone who has the same board confirm whether these two chips are part of the BIOS/EC firmware setup? And if so, would you be able to provide the correct dumps for both UT2 and UT6?
Additionally, I can't find any larger BIOS chip on the top side of the board. If anyone knows where the main BIOS is located on this motherboard, I would appreciate the guidance.
Sorry, but I don't see an option to edit my post, so I'm sending a new one.
I believe I've found the main BIOS chip on the board, located at UC5. Unfortunately, I don't have the right adapter for my programmer at the moment to proceed with flashing a new BIOS.
I've also found information suggesting that UT2 and UT6 might be related to the USB-C functionality, so it's probably not a major issue if you can't provide a new dump.
Anyway, if someone has dumps for these chip models and can share both, I would greatly appreciate it! That way, I can compare UT6 with my dump I have.
I have downloaded the bios file but could not program it to my winbond IC - it is too large.
Any ideas how to resize the bios file?
You don`t resize the bios file to fit. I`ll bet you have chosen the wrong chip. Read the 2 posts above yours, he made the mistake of erasing both the 25Q80DVSIG chips. Don`t make that same mistake
I have downloaded the bios file but could not program it to my winbond IC - it is too large.
Any ideas how to resize the bios file?
Yeah, that was me. Double-check UC5, it's on the other side of the board and looks a bit different. I initially mistook it for a MOSFET and ended up picking the wrong chip.
Comment