PackardBell EasyNote TG71

[yucel-yucel]

It was replaced because the SR1YJ in the device was faulty. However, the image freezes at the boot logo. SR1YV was set up to try, SR1YV processor renders late and freezes again on boot. Can I run this device stably with sr1yv?

PackardBell EasyNote TG71-BM-0001TK
EA53-BM/EG52-BM MB
14222-1
448.0373.0011

[hoaca388]

Re: PackardBell EasyNote TG71

it was replaced because the sr1yj in the device was faulty. However, the image freezes at the boot logo. Sr1yv was set up to try, sr1yv processor renders late and freezes again on boot. Can i run this device stably with sr1yv?

Packardbell easynote tg71-bm-0001tk
ea53-bm/eg52-bm mb
14222-1
448.0373.0011

[yucel-yucel]

Re: PackardBell EasyNote TG71

Unfortunately, those bios didn't work. It stays at 0.14ma, no display.

[hoaca388]

Re: PackardBell EasyNote TG71

Unfortunately, those bios didn't work. It stays at 0.14ma, no display.

Try again :

[yucel-yucel]

Re: PackardBell EasyNote TG71

Try again :

panel light is on, but there is no data. I'm wondering if the processor is compatible. But with the old bios, the image came with this processor, it came to the desktop once, albeit late.

[hoaca388]

Re: PackardBell EasyNote TG71

panel light is on, but there is no data. I'm wondering if the processor is compatible. But with the old bios, the image came with this processor, it came to the desktop once, albeit late.

Okay, this time I just deleted your original ME profile and tried again.

[yucel-yucel]

Re: PackardBell EasyNote TG71

Okay, this time I just deleted your original ME profile and tried again.

Unfortunately, that didn't work in the bios either. It stays at 0.13ma, no display. I removed the SR1YV and replaced it with an SR1W4 processor, the result is still the same. I think I will return it.

[SMDFlea]

Re: PackardBell EasyNote TG71

panel light is on, but there is no data. I'm wondering if the processor is compatible. But with the old bios, the image came with this processor, it came to the desktop once, albeit late.

Bios version 1.10, extracted from Packard Bell update

[yucel-yucel]

Re: PackardBell EasyNote TG71

Bios version 1.10, extracted from Packard Bell update

This bios freezes on packard bell logo like original bios. I think there's something wrong with the card that I can't detect.
Thanks everyone.

[yucel-yucel]

Re: PackardBell EasyNote TG71

Bios version 1.10, extracted from Packard Bell update

I solved another bug on the motherboard, it worked fine with the bios you posted. Thanks...