hp elitebook 745 g6 amd bios unlock

[leks2012]

Hello everyone,

I’m trying to restore a **HP EliteBook 745 G6** with a corrupted BIOS. Here’s the critical info:

### **Device Identifiers**
- **Motherboard**: 6070B1487701-MB-A01
- **Serial**: `5CG0012F86` | **ProdID**: `8ZE82UP#ABA`
- **Build ID**: `19WWTLBT601#SABA#DABA`
- **Feature Byte**: `3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbUbhcAdUdpdqfPhKhkjhk8.g`
- **CPU**: AMD Ryzen 5 Pro 3500U

### **Symptoms**
- Powers on (fans/LEDs), but **no display**
- No keyboard/touchpad response
- EC seems unresponsive (power button dead)

### **Attempted Fixes**
1. Reflashed BIOS via CH341A (multiple dumps, no success).
2. EC reset (battery disconnect + 60-sec power hold).
3. Verified voltages (3.3V present on BIOS chip).

### **Request**
- A **clean BIOS dump** matching:
- Board: `6070B1487701`
- **Build ID**: `19WWTLBT601#SABA#DABA`
- Feature Byte: `3X476J...` (full above)
- Advice on EC firmware (IT5570VG?) if suspected.

### **Attachments**
- [High-res motherboard photos](link) (BIOS chip + labels visible)
- Current BIOS backup (available if needed).

**Thank you** for your expertise! This community is my last hope.

[peste]

post merged...next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[peste]

post the contents of the bios chip even if it is corrupted..

[Deba Modok]

Plese help me, my hp elitebook 745 g6 show this message " There is a problemwith the hp end point security contoller on the unit" please solve this problem,
PRODID 5VU37AV
sn# 5CG0472Z02

[shiyab]

Plese help me, my hp elitebook 745 g6 show this message " There is a problemwith the hp end point security contoller on the unit" please solve this problem,
PRODID 5VU37AV
sn# 5CG0472Z02

hi tryflash main

[leks2012]

post the contents of the bios chip even if it is corrupted..

bios

[SMDFlea]

bios

try. flash both.

[vladixx]

Hi, I also have HP elitebook 745 g6, how do i reset password? im a newbie can you help me with the steps. thank you!

[peste]

Hi, I also have HP elitebook 745 g6, how do i reset password? im a newbie can you help me with the steps. thank you!

post S/N, full name and model, motherboard model, product number,etc.
post the contents of the bios ....

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...hannel=ThisIsH