-
↵
Any donations to badcaps are welcome, click this link to donate . Thanks to all the supporters
https://www.badcaps.net/donate -
Hello friends...I have an HP ProBook 650 G4 laptop that has a water damage problem...I cleaned the sulfated parts...Now the device turns on and draws between 0.3 and 0.38 amps and turns off...The laptop voltages are being generated. Please give me the healthy bios and ec file. Thank you.Comment
-
Type the laptop serial number, full name and model, motherboard model, etc.
read the forum rules..https://www.badcaps.net/forum/troubl...before-postingComment
-
hello everyone
please clear me
delay about 60 seconds
thank youComment
-
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
https://www.badcaps.net/donate/
----------------------------------------------------------------------------------------------------------------------------------------------------------------------Comment
-
Hi everyone,
I’m working on a non-booting HP Envy x360 2-in-1 laptop and need verified firmware dumps for both the main BIOS and EC chip. I’ll be posting my own backups for reference and comparison.
🔍 System Details- Model: HP Envy x360 15-fe0053dx
- Product Number: 7HVO3UA#ABA
- Build ID: 23WW2GQZ6D
- Motherboard: JPR50 LA-M794P Rev: 1.0 (2023-03-03)
- Motherboard SPS: N30979-ABA
- LCD SPS: N49271-601
- Date Code: 172380
- Keyboard Type: 0
- Feature Byte:
3XeB7kN7.Ba.aqewkwBiBVuhcbdxYPgB
hZnp.praepq0Md4qkdf
🔧 Chip Info- Main BIOS chip: Winbond W25Q128JVSQ
-
Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
Hello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
07-24-2025, 02:17 PM -
Hello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Hello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...
Comment