Try our new boardview, bios, & schematic search. Over 1.3 million files for download!
HP ProBook 650 G4
Collapse
X
-
Hello brothers, I have a problem with a BIOS. I have flashed several files, but the problem persists. The cooler fan starts spinning very fast shortly after powering on.
HP ProBook 650 G4
SN: JPH928L99S
ProdID: 2VX21AV
Mainboard : CHROMIA-6050A2930001-MB-A01(A1)
The old BIOS files are attached.
Attached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
-
650 g4 delay about 40 seconds and errore security device problem the unit
s.n :5cg8154t86
it is not its own original filesAttached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
tryAttached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
try clean ME image. I made 2 - one with PTT disabled (as it was in your backup), the other one with PTT enabled. try 1st outimage.binAttached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
hello everyone
please clear me
delay about 60 seconds
thank youAttached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
Hi
Type the laptop serial number, full name and model, motherboard model, etc.
read the forum rules..https://www.badcaps.net/forum/troubl...before-posting
HP ProBook 650 G4
Serial_5CG924BWXB
ProdID:2GN04AV
Build Id_17WWC6CT601
CMIIT ID :2018AJ0169
MSIP-CRM-INT-8265NGW
MAINBOARD : CHROMIA-6050A2930001-MB-A01(A1)Leave a comment:
-
Type the laptop serial number, full name and model, motherboard model, etc.Hello friends...I have an HP ProBook 650 G4 laptop that has a water damage problem...I cleaned the sulfated parts...Now the device turns on and draws between 0.3 and 0.38 amps and turns off...The laptop voltages are being generated. Please give me the healthy bios and ec file. Thank you.
read the forum rules..https://www.badcaps.net/forum/troubl...before-postingLeave a comment:
-
Hello friends...I have an HP ProBook 650 G4 laptop that has a water damage problem...I cleaned the sulfated parts...Now the device turns on and draws between 0.3 and 0.38 amps and turns off...The laptop voltages are being generated. Please give me the healthy bios and ec file. Thank you.Attached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
HP ProBook 650 G4
CT Number_6GPDAN3GWBT14W
Serial_5CG9151HF1
Product_2GN02AV
Build Id_17WWC6CT601#SUUG#DUUG
Fearture byte_3X476J6S6b7B7H7M7Q7W7m7saBaEapaqauawbhcAdUdpdqfAhk.fh
Attached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
PLEASE . REMOVE PASSWORD HP PROBOOK 650 G4
S:N 5CG9151HF1Attached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
-
try..Attached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
hi please help me to remove bios password i tried with RCUNLOCKER and hpunlocker tool but not joy,,
sr: 5CG9218DQ7
THANKS IN ADVANCEAttached FilesPremium supporters get full download access and other benefits.
Leave a comment:
-
With HXD , open your bios file / search
In option use unicode
Than search every one of this names and note it
Product Name
Serial Number
Product Configuration ID
BuildID
FeatureByte
System Board CT Number Leave a comment:
-
can you show me how to find machine information based on the machine's original biosLeave a comment:
Related Topics
Collapse
-
by studdy05Hp Probook 450 G7 s# SCD0348W35 had a locked BIOS. Bought BIOS and EC chips off Ebay that were supposed to match this machine - the 450 G7. Flashed in the BIOS on chip i bought using a CH341. BIOS unlocked next boot. Some error to contact HP. Entered BIOS and reset to system defaults and rebooted. Machine worked fine but every cold boot the contact HP message popped and everything else worked as fine. Assumed the error was from EC chip not matching BIOS that i just flashed in. So i flashed in the EC that was supposed to match from the EBay chip i bought and instant brick.
Ive got...07-08-2025, 09:24 PM -
by whelanm87Hi everyone,
I’m working on a non-booting HP Envy x360 2-in-1 laptop and need verified firmware dumps for both the main BIOS and EC chip. I’ll be posting my own backups for reference and comparison.
🔍 System Details- Model: HP Envy x360 15-fe0053dx
- Product Number: 7HVO3UA#ABA
- Build ID: 23WW2GQZ6D
- Motherboard: JPR50 LA-M794P Rev: 1.0 (2023-03-03)
- Motherboard SPS: N30979-ABA
- LCD SPS: N49271-601
- Date Code: 172380
- Keyboard Type: 0
- Feature Byte:
3XeB7kN7.Ba.aqewkwBiBVuhcbdxYPgB
hZnp.praepq0Md4qkdf
🔧 Chip Info- Main BIOS chip: Winbond W25Q128JVSQ
-
Channel: BIOS Requests ONLY!
-
by macabookHello everyone,
I’m currently working on a dead MSI GP75 Leopard (MS-17E71) motherboard (i7 CPU, NVIDIA GPU) with a no display/no backlight issue initially. After extensive investigation, I’m at a critical stage involving EC firmware, BIOS/ME region interaction, and possible deep corruption. I'm seeking advanced insight from anyone with experience in EC/BIOS sync issues or PCH-level behavior. Here’s a full breakdown:
🧩 Initial Issue- Board powers on (fans spin, keyboard lights up and can be adjusted, caps lock led lights), but no display or backlight
- External display (HDMI) shows
-
Channel: BIOS Requests ONLY!
07-24-2025, 02:17 PM -
by cr4zychrissHello everyone,
I am requesting urgent assistance to unbrick my laptop, a rebranded TongFang GK7MRFR chassis. The laptop is completely dead following a faulty in-OS EC flash attempt.
I have successfully used a CH341A programmer and can read/write/verify both flash chips, but using my backups/extractions has failed to restore power. The root cause is likely a corrupted Intel Management Engine (ME) region or an incompatible EC/BIOS pairing. System & Hardware Details- Barebone / Chassis: TongFang GK7MRFR
- MB: MB: GK5MP5X V1.0 Prod :GK5MRFV10T04201310281
- Rebrand: PC Specialist
-
Channel: BIOS Requests ONLY!
-
by piratiHello everyone,
I recently bought a non-working Asus Zenbook Pro Duo OLED UX8402ZA that was listed for parts only. The seller mentioned that it had no display output but that the charging lights worked.
When the laptop arrived (without a charger and SSD), I connected a charger and confirmed with a multimeter that it was charging the battery. However, when I tried to power it on, only the backlight of the secondary display came on. There was no image, and it didn’t boot into the BIOS.
I decided to try flashing a new BIOS, but since I didn’t want to desolder...-
Channel: BIOS Requests ONLY!
-
- Loading...
- No more items.
thanks sir its 100% works thumbs up
Leave a comment: